Forums

Forums
Renewable Heating
Air Source Heat Pum...
ASHP heating issues...
 
Notifications
Clear all

ASHP heating issues / error code - advice very much appreciated

 
Air Source Heat Pumps (ASHPs)
Last Post by Mars 1 year ago
4 Posts
4 Users
0 Reactions
1,409 Views
RSS
 Em_19
(@em_19)
New Member Member
Joined: 2 years ago
Posts: 1
Topic starter 10/11/2023 11:30 am  

Good Morning,

I'm a new member to this forum after stumbling across it in my panic the last few weeks.

I moved into a shared ownership flat just over a year ago, I have a Mitsubishi Ecodan ASHP installed alongside a 200L indirect cylinder.

I noticed 3/4 weeks ago that I had a water at the base of my cylinder, which turns out there was a crack at the top of the stainless steel inner tank and it was running down the inside of the casing. New cylinder therefore needed.

Contacted the housing association that is the other half of my shared ownership, they would have nothing to do with advising engineers etc to assist with the installation and informed me I just needed to get some gas certified to install a new cylinder. After many a tear at the unexpected cost of this, my dad is an electrician and has a plumber he works closely with, we spent a about 2 weeks researching the best cylinder to replace it with so that existing pipework/connections didn't need to be changed too much and installed it.

Since the installation of the new cylinder my ASHP is not heating my flat or hot water. It is running and everything appears that it should be working, but my radiators don't get any heat to them at all. The immersion side of the cylinder works fine, so I have hot water that way. We have bled everything, and been running the ASHP on and off for a week now but still no heat. My dad and the plumber have tried everything but to no avail. Last night I had an error show up on the display of "check error 01"

I can't find any error codes like that on the Mitsubishi error code checker.

I'm just desperate to get some heat in my home, but really cannot afford to keep having all these different engineers come out to my home when I couldn't afford a new cylinder in the first place. What's even more frustrating is the lack of care of the housing assocation that own the other 50% when they have engineers they use for their rented properties. But because I am not a commercial entity they will not come and look/do work for me.

I just wondered if anyone had had any similar issues or had an idea of what the error code could be?

Any help/advise would be greatly appreciated.



   
Quote
Topic Tags
ASHP heating error code
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 5 years ago
Posts: 4427
10/11/2023 3:59 pm  

Welcome to the forum.

I cannot see an error 01 in the manual for an Ecodan, which may or may not be relevant.

When you say the heat pump is running, do you mean the compressor and fan? Have you checked the water pumps?

Some photos of your system may be helpful.

 


This post was modified 1 year ago by Mars

   
ReplyQuote
Abernyte
 Abernyte
(@abernyte)
Honorable Member Member
Joined: 3 years ago
Posts: 236
10/11/2023 5:41 pm  

Stab in the dark, might it be error P1?  This is the system lost thermistor value error. It can be reset in the settings -



   
ReplyQuote



Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3412
08/03/2024 11:31 pm  

@em_19 did you ever resolve this error?


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  ASHP (73) , heating (3) , error code (3) ,



Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →