Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
| Posts with their shortened content | ||
|
|
RE: Indevolt Batteries UK Support & Info Thread
By EtchedPixels, 4 weeks ago
Forum
Energy Storage
|
|
| Yep. That's how most units seem to work - but the question I asked was "if wired in". The moment it stops being a camping accessory and is permanently wired into the property the rules change. | ||
|
|
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
By cathodeRay, 4 weeks ago |
|
| @baroquebank — some more comments on the latest version of your spreadsheet: This tells us that either one (or possibly both) are wrong. The Heat Geek Prop Output numbers are almost certainly very w... | ||
|
|
RE: Freedom Heat Pumps Cloud
By F1p, 4 weeks ago |
|
| Don't underestimate the time it takes, reverse engineering protocols with limited documentation requires a data, analysis and a methodical approach. Modbus might be a bit easier but there is still a c... | ||
|
|
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
By baroquebank, 4 weeks ago |
|
| Thanks again, this is very informative. Based on this info I've extended my calculation (note, not gone into full details but broadly to test thinking) which then shows:a: HeatGeek and Octopus values ... | ||
|
|
RE: Cleaning solar panels with a hosepipe
By Majordennisbloodnok, 4 weeks ago
Forum
Solar Photovoltaic (PV)
|
|
| This is one reason I'd never make a good solicitor. I'm not certain you've convinced me but I am certain I'm not sure about that section now - if you see what I mean. Here, I think we are in complete... | ||
|
|
RE: Cleaning solar panels with a hosepipe
By JamesPa, 4 weeks ago
Forum
Solar Photovoltaic (PV)
|
|
| This term is defined in the Water Use (Temporary Bans) Order 2010 as amended as follows: (2) In [the relevant section of the Act], “artificial outdoor surface” means any of the following— (a)any area ... | ||
|
|
RE: Cleaning solar panels with a hosepipe
By Majordennisbloodnok, 4 weeks ago
Forum
Solar Photovoltaic (PV)
|
|
| I wouldn't necessarily recommend sticking a high pressure nozzle onto the end of the hosepipe and directing it up underneath the solar panels but other than that there are no more safety implications ... | ||
|
|
RE: Cleaning solar panels with a hosepipe
By Lenny, 4 weeks ago
Forum
Solar Photovoltaic (PV)
|
|
| I have often wondered about using a hose to clean our panels but, any current ban aside, could not decide if it would be a good idea or have any safety implications ? | ||
- 27 Forums
- 2,750 Topics
- 64.7 K Posts
- 2,868 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Yes, an EV changes everything drasticall...
By Papahuhu , 29 minutes ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 30 minutes ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 6 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 8 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 8 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 9 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 day ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 day ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago


