Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 112 / 173
Posts with their shortened content
RE: What crazy nonsense are inverter limits and why are they imposed?  

By Batpred, 3 weeks ago

  Continuing this here as it is related to dno approvals. Anyone needing the background, it is at the fogstar/solis adventure. The eventual grounding of my dreams for HA optimisation may also fit elsewh...
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature  

By Sandman1600, 3 weeks ago

  @dgclimatecontrol Thanks... this was resolved back in March/April.
dgclimatecontrol RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature  

By dgclimatecontrol, 3 weeks ago

  It'll bring on electric back up heaters if at 55C as they'll work quicker in the winter. Not sure about old ME units but Daikin had a 6 or 9kW back up! often working to start the system off then being...
GrahamF RE: Should Our Water Circulation Pump Be Configured to Run All The Time?  

By GrahamF, 3 weeks ago

  @jamespa unlike some systems, the Grant Aerona does have the ability to install a firmware upgrade. The Grant support engineer told me that they are planning some improvements in another area.
RE: New Fogstar 15.5kWh upright solution  

By Batpred, 3 weeks ago

  Some light at the end of the tunnel. Fogstar had some issue with their ticket management system, so it must have been quiet for the 3rd level engineering folks for a few days. 😊 The system now...
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?  

By JamesPa, 3 weeks ago

  Maybe it will happen as a result of a firmware upgrade, if they push them out which they may or may not do/may or may not be able to do.
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By JamesPa, 3 weeks ago

  Im sceptical, whats the mechanism? I get the impression that it may be entirely that. Not a good sign. The problem for you is that he will eventually get tired of it and find ways 'out' If by then...
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature  

By Sandman1600, 3 weeks ago

  @davidnolan22 Hi..! We've only just turned on the heating again following the summer but it's not overly concerning right now. It's cycling a little but we're getting COPs of between 3.5 and 4. I'll k...
DREI RE: Help me keep the faith with my air source heat pump installation  

By DREI, 3 weeks ago

  That's the problem with the UK, in comparison with America for example or Germany. However, as long as the owner/consumer keeps all the information and can build a timeline of the events, especially i...
RE: BMW i4 eDrive40 M Sport  

By Batpred, 3 weeks ago

  Electrical is the only way forward.. But until we get to experience Major's Scalextric track, the humble home ev charger may have to do! Have other bmw/mini drivers been experiencing pains with cha...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By Crimson, 3 weeks ago

  Thanks both. I’d forgot to detail that pump speeds either side of the LLH (Grant one and one in pump room). A lot of experimenting with different speeds/paired speeds was also done. Best performance s...
RE: Air source heat pump roll call – what heat pump brand and model do you have?  

By Andy-e, 3 weeks ago

  Manufacturer: Panasonic Model: WH-WXG12ME8 Type: ASHP Arrangement: Mono Area of Country: Cambridge Home Type: Terrace House Size: Square Metres:225 Insulation Level: 7 Heat Loss Calculation: 10kW @ Am...
Page 112 / 173

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO