Recent Posts

| Forums | Topics

Page 164 / 172 Prev Next

Posts with their shortened content
	RE: Glycol By JamesPa, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	This alone might not much, are you operating 24*7 on weather compensation with ft as low as possible consistent with house heated to to a comfortable temp. If not then there is another adjustment to ...
	RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix By Majordennisbloodnok, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Actually, there's a rather greater degree of cattle-herding. It's precisely because of the extent of cowboy influence that the pirates have been brought in.
	RE: Octopus tariffs - a quick comparison By nickmorgan, 4 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@tim441 and @majordennisbloodnok We're installing Fox batteries and inverter. The 5kW inverter can output upto 5.5kW but only for 60s, typically it will be operating at a maximum of 5kW. The batteries...
	RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix By Pirate Rich, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Oh I do a good pirate accent alright... 🏴‍☠️😂👍 I'm sorry i've disspaointed on the previous occasion... But tbh its a bit weird doing full pirate when there...
	RE: Glycol By Westkent, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	After a bit of a winge to my landlord they’ve now agreed to flush out the Glycol and install anti freeze valves. Heres hoping that will push up my COP
	RE: Mitsubishi Ecodan F8 error By Mars, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Almost certainly one for @ashp-bobba to put his Ecodan error codes to the test 😉
	RE: Daikin 9kW to 8kW Swap Offer from Octopus By Terry1812, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@matban , I have a couple of thoughts. 1) consumer protection act 2015, fitness for purpose. 2) You appear to be saying you have heat loss of 5kw, so if you get an 8kw, so over the top, BUT as it’s t...
	Mitsubishi Ecodan F8 error By HJD, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi all - I haven’t been active for a while but still keep an eye on the ever helpful forum. Just wondering if anyone has experienced an F8 error code with the Mitsubishi Ecodan PUZ series? A neighbour...
	RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix By Transparent, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Having just watched the latest Podcast of Mars talking with @pirate-rich I must express my disappointment. Not only was no pirate in sight, but there was a complete absence of any Swashing and Buckli...
	RE: Testing new controls/monitoring for Midea Clone ASHP By cathodeRay, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I think you are onto something here. From the Engineering Data manual: Attachment : image.png But that appears to be for 'AUTO MODE' and I can't find anything that says what 'AUTO...
	RE: Testing new controls/monitoring for Midea Clone ASHP By benson, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@papahuhu I need three reheats to cater for our DHW usage. Regarding homely there’s obviously a distinction between cycling and just turning off. Our homely would tend to overshoot and then turn off i...
	RE: Testing new controls/monitoring for Midea Clone ASHP By Papahuhu, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Just out of interest, what is the driver for you to run the DHW cycle 3 times in 24 hrs? Wouldn’t that be adding significant power consumption compared to a single run. The other observation is that y...