Recent Posts

| Forums | Topics

Page 101 / 164 Prev Next

Posts with their shortened content
	RE: Midea ASHP – how to set weather compensation By pash44pump, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay thank you. I am away from home at the moment but when I return I will download the data from the dataloggers. In terms of actual power usage, helpfully, I can now get all the data from my ...
	RE: Getting ready for export By Batpred, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@majordennisbloodnok Thank you for raising it, major! The context of "no solar" is very relevant. A few things, KISS applies: - consulting an electrician early on is about making sure...
	RE: Getting ready for export By Majordennisbloodnok, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	With respect, since your home is connected to the grid, it’s not just sensible to consult an electrician; it’s a building regulations requirement for a qualified electrician to sign off the work. It d...
	RE: Say hello and introduce yourself By Majordennisbloodnok, 3 weeks ago Forum Introductions, Forum Rules & Updates
	In a way, @scalextrix, you and @jamespa are talking about different points. You’re quite right that one needs the right tool for the job. However, even the right tool needs to be used correctly. Is th...
	RE: Samsung Holiday schedule By Mars, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Let's see if we can tempt @glyn-h to give his insights.
	RE: New Fogstar 15.5kWh upright solution By Transparent, 3 weeks ago Forum Energy Storage
	I should've read further before posting the above. Attachment : image.png What we learn from this is that SunSynk believe that their inverter should send commands to directly configure the BMS....
	RE: Question about Heating Pump Operation mode – Ecodan FTC6 v20.06 By rhh2348, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	This isn't an exact reply to your question, as I don't have the same hardware as you, however if you want the primary/circulation pump to stop shortly (/immediately) after the compressor stops, on my ...
	RE: New Fogstar 15.5kWh upright solution By Transparent, 3 weeks ago Forum Energy Storage
	@ggw I'm reading the Sunsynk ECCO manual and I've found some relevant information about low-battery settings: Attachment : image.png That's a pretty strong indication that you can put wh...
	RE: Daikin Octopus installation update - I saw my first defrost. 😍😂 By Jancold, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@radwhisperer It does seem to occur most loudly the morning after the legionnaires cycle, so that could be it.
	RE: What crazy nonsense are inverter limits and why are they imposed? By Transparent, 3 weeks ago Forum Energy Storage
	Let's first note what those parameters are. They are defined by Sect.27 of the Electricity Regulations 2002. Attachment : ElectricityRegs_S27.png Historically DNOs have maintained the voltage b...
	RE: The Future of Heat Pumps: Why Quality, Choice, and Innovation Will Define the Next Era of Home Heating By Mars, 3 weeks ago Forum Government Schemes, Regulations, Planning & Organisations
	I’ve met the Flexi-Orb team, and they come across as genuinely professional and focused on doing things properly. Whether they can improve installation standards long-term remains to be seen, but what...
	RE: What crazy nonsense are inverter limits and why are they imposed? By Batpred, 3 weeks ago Forum Energy Storage
	That's exactly what is expected, that voltage etc will vary. But how can the DNO keep it within specific quality parameters, unless they monitor it? What the folks were asking is if these component...