Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 66 / 165
Posts with their shortened content
RE: Electricity price predictions  

By Old_Scientist, 2 weeks ago

  I cannot understand why heat pumps (and solar/battery) are not mandated for all new build properties in the UK. I know the government are unlikely to meet their target for new build homes, but there a...
cathodeRay RE: Midea ASHP – how to set weather compensation  

By cathodeRay, 2 weeks ago

  @pash44pump - as I said yesterday, see if you can get into the history pages of the Midea app - it should (if I recall right) have hourly and/or daily energy out, and you could use that to sanity chec...
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters  

By colinc, 2 weeks ago

  @toodles The practicalities of investing in Wind and Solar is something I no little about; and although it does sound interesting, rightly or wrongly I am not very motivated that way. There seems to b...
RE: Radiator Sizing Dilemma: Vertical vs Type 33 for Low-Temperature Heat Pump Systems  

By Old_Scientist, 2 weeks ago

  This looks OK. Overall you have roughly the right amount of heat going into each floor. What is the design temps for the bedrooms? Is it already low at 18C, or have they designed to 21C so less of an ...
RE: Midea ASHP – how to set weather compensation  

By pash44pump, 2 weeks ago

  @cathoderay How would you suggest I go about collecting energy out data given what you know already about what data collection I can currently do with dataloggers, energy in and COP assumptions? Do th...
RE: How can I programme a setback for my Samsung Gen6 8kW heat pump?  

By Old_Scientist, 2 weeks ago

  I'm not familiar with Hive thermostats/controllers, but as @jamespa says, not all external thermostats work well with heat pumps. Mine has 3 different modes, so I just use the simple on/off configurat...
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters  

By colinc, 2 weeks ago

  @jamespa Well, you must have been an "early adopter" for solar panels; what I describe as "bleeding edge" as opposed to the 'leading edge", and will have gained considerable experience over that time ...
RE: How can I programme a setback for my Samsung Gen6 8kW heat pump?  

By JamesPa, 2 weeks ago

  No the whole house is on one zone operating at a single FT. In principle the rads in the bedrooms should have been designed for a lower room temp (ie made smaller than would otherwise be the case) bu...
RE: How can I programme a setback for my Samsung Gen6 8kW heat pump?  

By richdorm, 2 weeks ago

  @jamespa Thanks so much - so are your bedrooms on a different zone to the rest of the house?
RE: How can I programme a setback for my Samsung Gen6 8kW heat pump?  

By JamesPa, 2 weeks ago

  Not really in the way you describe The effect at best would be to switch it off altogether until the house cools. It wont limit it by reducing FT, which is what you really want to do. However I thin...
Majordennisbloodnok RE: Battery disconnected  

By Majordennisbloodnok, 2 weeks ago

  From my experience of the Shine app, I'd say that's not a safe assumption. I'd say it's confirming the inverter is up and running and the wifi dongle is connecting to the Internet but beyond that I'd ...
RE: How can I programme a setback for my Samsung Gen6 8kW heat pump?  

By richdorm, 2 weeks ago

  @old_scientist so - I have a Hive thermostat, which I've currently got set to 25 (!) so that I could set up the water law without it interfering.I guess having the hive means I've got an "external the...
Page 66 / 165

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO