Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 42 / 60
Posts with their shortened content
Mars Wattson has landed!  

By Mars, 3 weeks ago

  We’re excited to introduce Wattson, our brand-new AI assistant trained to help homeowners with heat pump and renewable heating questions. Wattson has been trained using content from Renewable Heating ...
RE: DHW SET UP with Samsung gen 5  

By JamesPa, 3 weeks ago

  OK. I'm not a Samsung expert but I can read the manual, which I must say is dreadful and reenforces my view that, whilst the heat pump is doubtless fine, the Samsung controller isn't fit for purpos...
How not to install a heat pump  

By sandvika, 3 weeks ago

  My heat pump was due to be installed in January after I had completed installing my underfloor heating and had got the floor tiling done. It all came off the rails when my tiler did his back in and ra...
RE: DHW SET UP with Samsung gen 5  

By Alfapat, 3 weeks ago

  So I go to Daily and 1 slot enter time and on choice and DHW then 2 to enter time and off slot , both times set after DHW symbol and so on. Then after the different time slots synchronising with Cosy ...
RE: DHW SET UP with Samsung gen 5  

By JamesPa, 3 weeks ago

  What exactly doesn't work in what circumstances and in what way? My guess, and it is only a guess but it's based on how my Valiant works (albeit, it would seem, with a much more friendly UI), is th...
RE: DHW SET UP with Samsung gen 5  

By Alfapat, 3 weeks ago

  To add fuel to fire still not working , can someone suggest someone I can talk this through with someone , for instance , does the dhw icon disappear untill the timings kick in , or should they be th...
RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately!  

By ASHP-BOBBA, 3 weeks ago

  @bart Best of luck moving forward, I look forward to hearing when all is settled and corrected for you. Please let us know once you have everything sorted.
Morgan RE: Renewables & Heat Pumps in the News  

By Morgan, 3 weeks ago

 
RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately!  

By Bart, 3 weeks ago

  Just by way of a brief update. Thank you so much for the responses received here and privately (given newbie status I'm unable to respond by mail). After hours spent suffering in silence it has been o...
RE: DHW SET UP with Samsung gen 5  

By Alfapat, 3 weeks ago

  Hey I totally appreciate your help and suggestions , sorry if seems negative . I have reset clock to am/pm , but not sure that’s the problem . I went over daily’s again on the am/pm settings including...
RE: Ecodan EMP2 kit - is it any good?  

By ASHP-BOBBA, 3 weeks ago

  Please note: heat meter accuracy at 95+% is as long as it is installed in the correct location, just thought I would add that before someone calls me out on it, I have seen them way out when the meter...
RE: Ecodan EMP2 kit - is it any good?  

By ASHP-BOBBA, 3 weeks ago

  @richard24738 Hi, I think is fairly accurate, somewhere between 75-90% but I think this can vary between a pre-plumbed cylinder and a stand alone system, TBH, I think its more about how well the probe...
Page 42 / 60

 

 

 

Share:

Join Us!

Latest Posts

Members Online

 No online members at the moment