Recent Posts

| Forums | Topics

Page 30 / 158 Prev Next

Posts with their shortened content
	RE: Anyone able to provide some feedback before I make my finale decision? Samsung vs Baxi vs Vaillant By Toodles, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	@eliuccio For what it is worth, here is my take on using a TOU tariff and battery to power the home with heat pump. During the summer months, I might well go back to Intelligent Octopus Flux but, for ...
	RE: Request for feedback on where we're at with our quest to get an ASHP or ideas. By bontwoody, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	Well done on sorting out the insulation first Matt. Is the heat loss figure before or after all your proposed changes?
	Request for feedback on where we're at with our quest to get an ASHP or ideas. By giryan, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	So, as I mentioned in Introductions a while ago we're nearly a year into a Retrofit process, with no actual work done to show for it. The delay is frustrating, but I'm quite glad we've not had a bad A...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	He showed me a photo of 5-10l/min. However am not convinced this pump was the issue. Realised I have photos of the flow setter from early 2024, and it sat at 28l/min, and was before rad upsize...
	RE: Anyone able to provide some feedback before I make my finale decision? Samsung vs Baxi vs Vaillant By Eliuccio, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	Hello folks, I thought it was worth updating on my journey. My Vaillant aroTHERM plus 5 kW combined with Vaillant uniSTOR Heat Pump Cylinder 150 litre seems to work fine. I only had to increase...
	RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems By Toodles, 6 days ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@morgan I should just have written ‘Mea Culpa’ shouldn’t I? 😉 Toodles.
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	Ok he's told me he'd like to see depending on what it's doing between 18l/min - 28l/min. Have asked what it was like before
	RE: Are We Sleepwalking Into Another Race to the Bottom? By Lawrence Leask FInstR, 6 days ago Forum Government Schemes, Regulations, Planning & Organisations
	'We learn from history that we do not learn from history.' I wonder if someone from marketing or a focus group came up with ZeroDisrup! You only have to join a few Facebook groups and ask for new pict...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	This is what I'm seeing during the DWH cycle currently. Will check again from 4pm when heating is running Attachment : Screenshot 2025-11-07 at 15.27.29.png
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	I'm only seeing 22l/min on the flow setter with the hot water cycle running but I'm none the wiser if that's good or not…
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	No idea, they may have done that when did the 50L install, but didn't mention it. He was saying the primary circulating pump (one bottom right?) - the new one is definitely working better as co...
	RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems By Morgan, 6 days ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@toodles LOL. By my reply, I was only trying to ensure that @chrisjd was notified of your response. You are hereby forgiven LOL.