Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 110 / 174
Posts with their shortened content
Transparent RE: Isolating the system for a planned power cut  

By Transparent, 3 weeks ago

  That's correct. I was mentioning it as something which would be a future requirement. Both arc-detection and surge suppression devices (SPD) are like paying an insurance package.Even if you decide not...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By JamesPa, 3 weeks ago

  R290 has an explicit installer setting for 'no buffer'. It couldn't be clearer!  
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By Crimson, 3 weeks ago

  A quick google states the Grant Aerona3 requires a low loss header as a mechanical break as part of Grant’s install package - I suspect they’re using the install package and not opting to not have the...
RE: Isolating the system for a planned power cut  

By Batpred, 3 weeks ago

  Bu the way, my understanding is that arcing detection is not required for new circuits unless it is a shared use property? Or is it only for rental properties? As for SPD protection, for the extra £20...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By Crimson, 3 weeks ago

  Thanks @JamesPa, I think the external volumiser suggestion - supposed to be insulated - was on assumption no space inside but yesterday’s visit it was drawn the conclusion that moving the expansion ta...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By JamesPa, 3 weeks ago

  They arent one offs, but they will empty the system in part if they go off. Better than making it work less well by filling with Glycol. Some argue not to bother with either on the grounds that prob...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By Crimson, 3 weeks ago

  I’ll check which version the Grant is, suspect like you thats what the specialist is seeing - that there’s no requirement. Antifreeze valves the installers suggested against their use as one offs? And...
RE: Odd noise in our Ideal Logic ASHP  

By JamesPa, 3 weeks ago

  These are well respected pumps so far as I know. Only one radiator on sounds very wrong, this should never be allowed to happen and is almost bound to cause odd and loud noises, excessive consumption...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By JamesPa, 3 weeks ago

  He is right. Better to eliminate it altogether. Is the Grant the R290 or the R32? The instructions for the R290 (which as it happens I was reading just yesterday) are very clear that buffer is not ...
RE: New Fogstar 15.5kWh upright solution  

By Batpred, 3 weeks ago

  So an update on the Solis inverter settings and rcbo circuit protection. Have to say that the Solis European wide support has been solid. So to recap, we had two concerns: - the grid rcd/rcbo needi...
RE: Isolating the system for a planned power cut  

By Batpred, 3 weeks ago

  I will continue the discussion on the solis installation on the Fogstar battery thread
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By Crimson, 3 weeks ago

    @jamespa - the Grant ASHP isn’t being replaced, the 13Kw will remain, apologies if I wasn’t clear. The heat specialist was experimenting with the current 13Kw in nightmode to see if it’s “overs...
Page 110 / 174

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO