Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 108 / 174
Posts with their shortened content
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?  

By Grantmethestrength, 3 weeks ago

  I think my strategy will be to leave it always on during heating season and then change it to sniffing cycle for the summer. I am sure it would be constantly pumping throughout heating season if it wa...
RE: New Fogstar 15.5kWh upright solution  

By Batpred, 3 weeks ago

  Thank you. The way that framework splits between 1 and 2 is not clear, but from what I can tell, this hybrid solis is class 1 and 2.   It has several internal oscillators including at least 2 for...
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH  

By bonobo, 3 weeks ago

  @jamespa thank your for your input. We used the heating today. I managed to balance the loops at same dT and rooms are in same range of 5 degrees and no longer there are cold rooms.Balancing a bit the...
RE: Renewable Heating Hub Homeowners' Q&A Podcast  

By Lucia, 3 weeks ago

  Just stopping by to say: 1) Mars I'm so sorry that your heat pump hit the skids - not fun - I hope it gets sorted (but yes, it's a bit ironic all things considered but it will be interesting to follow...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By Crimson, 3 weeks ago

  Thanks both. I’ll push gor thr glycol, 5% is 5% i cant lose.   I think further back in the thread I have pictures of the pump room and pictures from when the renovations were happening. It was co...
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?  

By KenBone, 3 weeks ago

  My circulation pump cycles, when the compressor is off, heating is still active on the controller (but all is up to temp), its testing the water (literally). Once the water temps fall below the thresh...
RE: Odd noise in our Ideal Logic ASHP  

By KenBone, 3 weeks ago

      Should have all you radiators and control the load with the heat pump controller, already sound like you're microzoing to try and control. It like driving s car, flat foot on the acceler...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By KenBone, 3 weeks ago

  @crimson if its the Aerona 3, check that you have the latest software, GRANT should be able to help you with this, i know they had a few updates with the Aerona 3. Ive pulled a few LLH separations ou...
Transparent RE: New Fogstar 15.5kWh upright solution  

By Transparent, 3 weeks ago

  Re-read what I wrote: It has an internal oscillator. There are two ways of implementing that. 1: The output from the backup port is always at the frequency set by the internal oscillator 2: The inter...
RE: Automation options to maximuse efficiency & ToU tariffs  

By JamesPa, 3 weeks ago

  If you are asking what is available to the non geek householder to optimise for ToU tarrifs, its Homely, Havenwise or Adia. To the best of my knowledge there is currently nothing else, unless the ene...
RE: Grant 13kW Aerona3 - issues getting zones to temp  

By JamesPa, 3 weeks ago

  Yes. I expect Grant specify a 'minimum system volume' which is the minimum permitted engaged (ie open) volume including the volumiser. Most manufacturers, so far as I can tell, base this on the need...
RE: New Fogstar 15.5kWh upright solution  

By Batpred, 3 weeks ago

  How does it work off grid without an oscillator?
Page 108 / 174

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO