Last seen: Jul 3, 2025
@richard24738 Sounds like a plan then! Toodles.
@richard24738 How about a slightly taller and evergreen plant in a pot where the present one is? 😉 Toodles.
@richard24738 Tricky one that as I imagine you don’t wish to construct a sunshade for the brickwork behind the pump. Ours gets the sun on the brickwor...
@richard24738 I think some heat pump controllers allow you (probably only in installer mode though) to adjust the external temperature probe to correc...
Yes indeed Major! We have a 1930’s built brick construction and found that pushing wifi signals around the whole house warranted a MESH network, so we...
@tim441 And further news for Homely integration with Midea and Samsung… Toodles.
@gary If no EV, a half-way measure might work? Cosy (8 hours available as 3,3 and 2 hour slots) at the lowest rate [currently approx 12.2 pence per kW...
@raiph Homely were still ‘at home’ this morning as I was chatting to technical support and sorting out a few things. As to the pipework; is corrugated...
@allyfish I changed to Cosy from Agile on July 1st. and for very similar reason; the faff factor does have a value! I’ve been monitoring the ‘average ...
@majordennisbloodnok Well said Major, I agree with every word and wish I had written it! My experiences with Octopus and all reports I have come acros...
@david999 I think the more knowledgable need to answer this one as I am not sure I understand what is happening. Don’t want to cause you more problems...
Latest Posts
-
RE: Heating coming on when not required
@editor It may be that. I do remember setting up a max ...
By bontwoody , 2 minutes ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 5 hours ago
-
RE: Pressure drop Primary circuit
Just to update you all. I made up my own fill loop as...
By ohdearism , 6 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hmm Before doing that I would want to be certain that...
By JamesPa , 11 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 11 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 22 hours ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 1 day ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 1 day ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 3 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 4 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago
