Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 30, 2026
@andrewj Have you considered just running it on a fixed flow temp? At the lower end there isn't really much to even compensate, your house must be wel...
@jamespa Its an emerson copeland, at least what I saw when they installed mine.Apparently the API can set a static flow lower than the app can, but I ...
@andrewj mine seems to select a totally different control strategy f you put the temp up to an unachievable temp, as soon as it can't maintain it it s...
@harriworld what have the confirmed? Anything? 😬
@kevh hopefully they will release an advanced controls mode. 👍 Or a "quiet mode" that does what you want.
@andrewj mines the opposite, louder than normal 😂
@andrewj there are loads of reasons 35C might be a practical limit. They need to look after oil return and maintain a minimum pressure ratio. At very ...
@toodles they were great when combined with really, really, large UFH systems.
I'm personally surprised ocotpus doesn't have a dedicated noise ninja team that nips these issues in the bud as soon as they are detected. There is no...
@toodles they are in a unique position also being the energy supplier, big opportunity to just cut out the middileman.
@toodles RED units were never known for being quiet at all.
@toodles I would think that octopus would do this eventually. At the moment it's just thermostatic.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 46 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 4 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 9 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
