Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Feb 22, 2024
[/quote] @rupes, thanks for your message above. Just to be clear, if I can get these two functions wired up at installation it'll mean I'll have the ...
I will add another version of that chart with outside temperature later in the week - I'm away from my home assistant server right now so can't access...
The Grant does in fact have a couple of potentially interesting features which could offer set back and boost functionality: Night Mode - which will...
An interesting thread. I have a Grant 13kW and am trying to get a better understanding of what it should be able to deliver in different conditions. T...
I also meant to add… I have the immersion heater connected up on my LLH and have experimented a bit with this. There are several settings linked...
Thanks for all the replies to my post of this morning - plenty of food for thought. I might try a lower target flow temp next time the conditions a...
Here’s a snapshot of my defrost activity over the last couple of days. Outside temp dropped to around zero and stayed in the 0-2deg range for a while...
So, thanks to the suggestion from @mikefl I am now up and running with Home Assistant and a wired connection from my heat pump into an old laptop. Set...
@nibemachawk I'm no expert either and not familiar with the Nibe system. Mine is the opposite problem - no problem heating up water and delivering hi...
@mikefl Thanks for the response. I’ll work on the basis of the 29l/min for now - that does seem the more logical - but I’ll see if the installer can...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 52 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 4 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 9 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
