Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Dec 5, 2025
@grantmethestrength That is kind Attached are photos First is of the control unit I have that is plugged in to the ack of the ASHP a...
@bontwoody My plan is to run the flow temp at about 35 degrees by varying the return temp according to the outside weather, I will have to see what...
Yes, always a bit of a risk as to whether it will all work, but did a lot of research and was quietly confident. Can't upload data but will try to giv...
That is kind, this site and your blogs were my main source of info. I Don't want to blow my own trumpet but it was all quite basic plumbing skills. ...
As I said the instructions are rubbish. I have contacted someone from the company in China but not got much useful info from them. I think it has its ...
@steelbadger Good point and I will have to see how it performs when it is really cold. I had that problem with my old ASHP set up but this one does...
@majordennisbloodnok Hi No real stats to speak of, in fact none. I just keep an eye on my smart meter to see how may KW the whole house is usin...
New to the forum but have followed it for a number of years with great interest. My background is that I live in a 1850's 4 bed house in Lancashire ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: How quickly would you want/expect heat recovery to take from setback?
I think a lot depends on how sophisticated the control ...
By Temperature_Gradient , 9 minutes ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
Not quite, regular A2W heat-pumps need a load of extra ...
By Temperature_Gradient , 14 hours ago
-
RE: Heat Geek installations: share your experiences
one thing i learnt from reading people’s comments and e...
By Batpred , 16 hours ago
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 18 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 18 hours ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 19 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 19 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 22 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 24 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 1 day ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 1 day ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 2 days ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 2 days ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 2 days ago
SPONSORS
