Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 14, 2026
This is the only reference image I can find of the same, albeit smaller unit. Mine looks very different to this.
@toodles thanks, are you sure please, no metal sticking out of the tubing? Like a ferrule.
Yes, it’s all looking a bit 1930s’esque. But this isn’t really that new, there’s a good reason why so many of them fled to South America post WW2, it’...
@toodles Don’t start me on moaning about homely 😀 When I look at my app I see the OAT swing +- 5 or 6 C, my installer tells me the value I’m s...
@editor Ta Yes mine is missing, I hope intentionally, the black tube is there but there isn’t a PT100 RTD in it. As far as I understand it, the h...
@bontwoody Yes, it’s been nasty. Driving rain and sleet being blown into the front, and very cold air being blown in the other direction. There aren’t...
@westkent it’s that black tube that is cable tied over the outside of the rear of the evaporator fins, right? I have the tube but there’s no sensor ...
@westkent thanks. I don’t have one of those, so can’t be my problem. I’ve got a third party controller which uses local weather station data to do i...
@westkent Thanks. Do you remember what that sensor was called or it’s function please, as mine is doing some other weird stuff too that makes no sense...
@jamespa Luckily I have the whole process documented as I could see it had become a comedy of errors. The insulation measures were installed by a s...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: How Accurate Is My DIY Heat Loss Calculation?
Any idea how efficient your gas boiler is? Is it a 50 y...
By Old_Scientist , 4 hours ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 16 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 1 day ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 2 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 2 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 3 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 6 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 6 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 6 days ago
SPONSORS
