Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 15, 2026
@editor i can’t believe you run a heat pump without being on a time of use tariff. I’m sure your power bill would make my toes curl.
@jamespa Thanks, yes. I think there are multiple hardware and control system issues. Just as a hammer has a primary purpose of inserting nails, the...
@toodles I was thinking along biblical lines, I’ve got some fence posts that would make a sturdy cross. I could put it in the front garden to remind t...
It’s not 2 minutes, it heats up for 40-50 minutes, at nearly full blast, then stops completely as the homely registers a downstairs temp above target....
@majordennisbloodnok Lot of retired folk round here, unfortunately for them and me, with nothing better to do. If I really wanted to get rid of the...
@jamespa Thanks, yes. it’s even more difficult as only they have access to the homely data. The installer is coming out next week, a repeat full he...
@toodles You are lucky you don’t have nosy and interfering neighbours. If I so much as approach a TPO tree with a pole saw I get them taking photos...
@jamespa The flow temp is a tricky one, because it is on/off constantly the heat pump ramps up and is only operating at max flow temp for ...
@jamespa Yes, last week I did it and there was a little air.I’ve been comparing radiator temp and the upstairs and downstairs are within 0.3C of ea...
New rads, new TRVs, new lockshields, power flushed, new pump 37l/min flow, i bled all rads, 3 air removal valves on system, plumber balanced and not t...
@jamespa its weird. It’s -1.5C outside, I’ve been monitoring the temp of the radiator (not the room) and it’s only running at about 24 C. The curre...
@jamespa Thanks We are running completely open loop and the upper floor rads are already reaching the same temp as the lower floor rads. So rebal...
- 26 Forums
- 2,714 Topics
- 63.6 K Posts
- 347 Online
- 7,114 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Samsung heat pump - data cable issue
If it's a data cable, current will be minuscule, voltag...
By bobflux , 8 minutes ago
-
RE: Rate the quality of your heat pump design and installation
I'm kind of at the end of my heat pump installation now...
By JandP , 5 hours ago
-
RE: MCS Quality Audit – Has Anyone Had One? Did It Lead to Remediation?
I got hit with an RHI audit in 2022. It was far from c...
By Abernyte , 6 hours ago
-
RE: Electricity price predictions
@papahuhu Groucho Marx had something to say about no...
By Toodles , 8 hours ago
-
Given the way radiation and convection effects don't wo...
By Majordennisbloodnok , 10 hours ago
-
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@jamespa haha very true, although the engineer yesterda...
By swwils , 13 hours ago
-
RE: Vaillant Arotherm Pro vs new Plus
One of the test modes in the installer menu forces it t...
By JamesPa , 1 day ago
-
RE: What a difference a few degrees make.
Wow. Having accepted the challenge, I ran the cold tap ...
By Old_Scientist , 1 day ago
-
RE: HeatPump maintenance in Swindon area?
@vince31 have you tried using our finder:/p>
By Mars , 1 day ago
-
Looking for beta testers for a new homeowner heat pump tool
Over the past few months I've been building a brand new...
By Mars , 1 day ago
-
-
RE: Indevolt Batteries UK Support & Info Thread
It depends on how you configure it via the app. The ma...
By JamesPa , 1 day ago
-
RE: Renewables & Heat Pumps in the News
Be interesting if this results in any wider changes to ...
By Jeff , 2 days ago



