
Last seen: May 14, 2025
@editor Confirmed. Just got the notification for this mention. Thanks 😀
@crimson A = Secondary circulation pump B = Magnetic filter C = Low Loss Header D = Flow Regulator? E = Diverter Valve? The question ...
The problem with looking at the flow and return temps on the controller is that they are constantly changing, so it might look good at one moment (and...
Same here - no notifications so far today. I did receive a notification around 15:00 yesterday, so it doesn't seem to coincide with the upgrade.
- can you clarify what this mean, please? Did you move into a property with the ASHP already installed (under a previous owner) or did you have the AS...
@derek-m @iancalderbank In the Grant/Chofu docs it's referred to as 'defrost temperature', so that's what Ive labelled it. I'm guessing it's a tempera...
Those valves you show are either open or closed - there's no 'partially open' option. They should be in the 'auto' position (far right) but they have ...
I've noticed three types of Defrost Cycle (or at least their impacts on performance) which are all nicely shown in today's data. Overnight it was...
Last Sunday, it was average -1.3C and very damp, so was in "defrost hell" which is every 40ish mins for a Grant: yesterday, it was +1.3C and dry, ...
There's also a parameter (41 22 I think) which controls how long the system pump runs after the compressor is off. I don't think this can run to hours...
@dannymoss23 Yes - Constant Curve is Constant Speed (constant speed is a poor name, but you can see why it is that). Proportional Pressure is NOT reco...
Hi - two things I've found reduced the 'flow noise' I was getting, might help you too: 1. Check for trapped air in your system i.e. bleed rads, and ...
- 26 Forums
- 2,112 Topics
- 46.4 K Posts
- 24 Online
- 3,405 Members
Join Us!
Latest Posts
-
RE: No-code, plug-and-play monitoring for your heat pump
We've got a svenar heat pump controller en route and lo...
By benson , 10 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 14 hours ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 17 hours ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@rikiarn - just have a think as to how much it will cos...
By Transparent , 1 day ago
-
Don't do much digging around.That's best left to the pr...
By Transparent , 1 day ago
-
Hi all, I was wondering if anyone had an idea of how th...
By Wh0am3ye , 1 day ago
-
RE: EBAC re-entering the ASHP market in 2023
@toodles confirm i have Ebac 5kw ASAP + homely and it w...
By marcinwloch69@gmail.com , 1 day ago
-
RE: Compute heat loss from energy used
@jamespa Ebac must be similar to Mitsubishi as they buy...
By marcinwloch69@gmail.com , 1 day ago
-
@pie_eater I have been thinking of adding cooling to my...
By TechnoGeek , 4 days ago
-
RE: Victorian Semi Retrofit / Extension ASHP and UFH Advice
Agree, but you may have a hard time convincing them, as...
By JamesPa , 5 days ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Hi - fyi - there's a dead image link in the 'Optimal In...
By seatonian , 5 days ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@chandykris Horses and beggars…. 😉 Toodles.
By Toodles , 6 days ago
-
RE: Cleaning up after gas meter removed
@agentgeorge Likewise in the loft space; we have 300mm ...
By Toodles , 6 days ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
This particular example is one of the worst I have seen...
By JamesPa , 6 days ago
-
-
RE: Fan running in hot weather ...why?
I wonder if it has some kind of pressure transducer to ...
By ASHP-BOBBA , 6 days ago
-
RE: Cooling with Samsung Gen6 and Flow error
@iaack The system isnt running long enough for any cond...
By EcoBaker , 7 days ago
-
@heacol thanks for confirming we can only hope NAPIT ag...
By Bart , 7 days ago