Last seen: May 19, 2025
Have also ordered a digital room thermometer to make sure my Wunda UFH display temps are accurate. Upstairs is on Hive, I do think that is accurate. S...
@mikefl the installer say the will service for Grant as G1 installers. Have messaged them to see if I can bring it forward as we are going on 11 month...
@jamespa it’s a 13KW with 250 litre Grant tank. It serves hot water and our downstairs UFC and 8 upstairs radiators. the house is 294 sqm, built by...
thanks James. Woke to 18.1 today which is not ideal after another frosty night. When the temp is above zero and no frost cycles we don’t have these...
Another frosty night. Woke to an average downstairs temp of 18.1 upstairs 18.0. it needs to do better than that. If it can’t do better than that b...
There is no obvious space for the LLH in our utility room. Perhaps that is why it wasn’t installed. I wonder if adding an external volumiser would be ...
Hello. So this will be our first full winter with the ASHP. It was installed around the 20th of January last winter and has been fine. One slight issu...
I think it’s safe to say it isn’t connected up. I’ve just looked at what the LLH itself should look like and seemingly I don’t have one. I’m pretty su...
Just went into the LLH parameters from Mike’s link. Mine was completely off. Now set to 3 and it also allowed for the LWT during defrost to be adjuste...
@mikefl hi Mike. Is this meaured in the same settings as you told me about the other day to measure the LWT and return temperature? Or configurable vi...
Woke to 17.5 to 18.5 throughout the house. Low of -6 overnight. have identified an issue though as the utility room was freezing and no feeling of ...
-3.5 outside now and indoor temps slowly rising, despite the defrost cycles every 45 mins.
- 23 Forums
- 2,098 Topics
- 46.2 K Posts
- 45 Online
- 3,385 Members
Join Us!
Latest Posts
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 3 hours ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 3 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 9 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hmm Before doing that I would want to be certain that...
By JamesPa , 14 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 15 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 1 day ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 1 day ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 2 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 4 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 5 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago