Last seen: Jan 10, 2024
Had a chance to unpack a box tonight and it all looks very well put together. All the electronics are connected with just the sense wires B+ B- to con...
So the plot thickens. DPD received a booking for the 15 parcels, but only received 14 from the agent at the port. Ive passed it back to Brian now to t...
So I checked my delivery today and saw that it was due to arrive on weds next week. Off I drove with wife and daughter to my parents for Christmas, se...
@hughf Ive got the V2 bms' coming. Should I connect the B+ first?
@transparent Solved. It required an input ie solar or battery before it started working. I hooked up my faulty 2nd solar array (a couple of dead panel...
@transparent yes I removed from the inverter to test. I tested at 2 connection points (it had to go through a tonne of conduit)
Ok now I've got a readying. It bounces from about 60 up to 160 ish ohms. Resistance is the same at the meter and at the inverter.
I'm tempted to run another cat 6 cable separately and see if that works. But will be a tomorrow thing. I'm stumped. It should definitely see the gri...
I have a spare. I'm getting no reading from either my old or new ct clamp with it. Any thoughts?
@transparent i appear to have put my multimeter somewhere safe.......
Installed and working.....but CT clamp isn't registering !!!!
Latest Posts
-
RE: 5 Star Service from Havenwise
Oh good! I was wondering when/if you might pick them ...
By Transparent , 2 hours ago
-
RE: Air Changes per Hour - ACH and the MCS requirement
update - my old installer insisted on a heat loss of 11...
By MatWin , 3 hours ago
-
I agree it's not very helpful. Generally, the max heat ...
By Old_Scientist , 5 hours ago
-
RE: Commencing on an ASHP Installation Process
I think therein lies the problem. Ratio of quotes to i...
By JamesPa , 1 day ago
-
RE: Why Your MCS-Certified Installer Might Not Be As Competent As You Think
Hive and most other smart thermostats don't play well w...
By JamesPa , 1 day ago
-
RE: Enabling WiFi: Samsung ASHP on Smart Things App
Thanks for the input. I've been running various experim...
By Grahamh-uk , 1 day ago
-
RE: Radiators downstairs are cooler at the bottom after ASHP install
@melonbuffet Hi, this sounds great is you are getting 5...
By ASHP-BOBBA , 1 day ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
I believe there's another reason that network upgrades ...
By Transparent , 2 days ago
-
RE: What’s the modern take on advised types of insulation?
@jeff I am sorry @jeff if I have misunderstood what you...
By Toodles , 2 days ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@editor Cobbler’s Mantra that!
By Toodles , 2 days ago
-
RE: Renewables & Heat Pumps in the News
Australia Blue, the first wind farm in Western Victoria...
By Morgan , 3 days ago
-
RE: Flow rate discrepancy between ASHP and manifold
That's useful thanks, I hadn't seen that table before. ...
By AshRolls , 4 days ago
-
In principle I agree, @johnmo, but with provisos. The...
By Majordennisbloodnok , 4 days ago
-
RE: Heat pump installation and BUS Grant timings
@jamespa Thats how I understood it too. 🙂
By ASHP-BOBBA , 4 days ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
@sallyl That sounds about right if they are re-filling ...
By Brendon Uys , 4 days ago
-
I wouldn't be so sure about that. Heat pump designers ...
By JamesPa , 5 days ago
-
RE: Jokes and fun posts about heat pumps and renewables
@toodles they're a rowdy bunch!
By Mars , 5 days ago
-
RE: Home energy storage & battery register
@jamespa To a certain extent, by exporting to the grid ...
By Toodles , 6 days ago
-
RE: Forum updates, announcements & issues
@editor Fairy Nuff Mars, I doubt that my ramblings woul...
By Toodles , 1 week ago
