Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 3, 2026
Are you able to look at that Cat6 cable still? What does it say on the side? It would be interesting if what your installer used was Cat6 STP (Shielde...
Given the way radiation and convection effects don't work precisely the same for heating and cooling, I'm not sure your analogy stacks up, @scrchngwsl...
Yup, ready to plug in. The most awkward part I found was finding the socket on the FTC6 board to plug the dongle into. Other than that, @f1p's instruc...
If you are going to stick with the native Mitsi controls, I'd just change the top end to 23.5 degrees at OAT 24 (which is a literal extrapolation of y...
I wouldn't personally set schedules in Melcloud since it requires the heat pump to be permanently connected to t'Interweb and any temporary glitch in ...
In effect, that's precisely what weather compensation is supposed to do, so if yours isn't doing that then the curve could probably do with a bit of a...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: How should the Boiler Upgrade Scheme be reformed?
Posted by: @temperature_gradient I'd argue the core ...
By Rob of York , 4 minutes ago
-
RE: DIY Heat Pump Installations: Navigating Legal and Regulatory Hurdles
I'm guessing it's a visual amenity consideration. Don'...
By JamesPa , 1 hour ago
-
RE: Replacing Storage Heaters with a Heat Pump in a Stone Cottage
Excellent find, thanks for posting the link here.
By cathodeRay , 4 hours ago
-
RE: Tesla Powerwall (2) Calibration Cycles
For Powerwall calibration, avoid forcing repeated deep ...
By EnergyStorageTech , 5 hours ago
-
Over the years, due to the non barrier PEX underfloor h...
By bobflux , 16 hours ago
-
RE: Getting closer to a finished Haier system
All the 45° elbows required for getting the primaries i...
By Singlespeed , 18 hours ago
-
RE: battery storage without solar
Indeed, current on the grid input = current used for ch...
By bobflux , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu @papahuhu A lot of tears and sweat went into ...
By Andris , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We have the same problem, 12 mature trees clip the morn...
By Papahuhu , 3 days ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
I had a battery and inverter installed a while ago, my ...
By Batpred , 3 days ago
-
RE: Is This Initial Free Quote From Octopus Trusted Partner Reasonable?
@ltron2 The EPC on our house is A-92, however that i...
By Rob of York , 3 days ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
The layout is confusing - much better like this: We b...
By downfield , 4 days ago
-
RE: Is it just me, or does tradesperson timekeeping and communication drive you absolutely mad?
My experience, backed up by opinions from various frien...
By Majordennisbloodnok , 4 days ago
-
RE: Analysis of the economics of switching to an A2W ASHP compared to other heat sources
I had a meeting today with a company based out of Swede...
By Mars , 5 days ago
-
RE: Review your electricity provider
We were with Octopus in our old house and it was fault...
By ian33a , 5 days ago
SPONSORS
