Last seen: Oct 17, 2025
@transparent it has a virtually clear seal that can barely be seen by eye never mind on a photo. I’ve not proded it (calibrated biro test!) so I’m not...
This is the bracket supporting our 7kW Vaillant. It looks more substantial and is designed for an higher upper weight limit and has no noise we’ve hea...
Boost goes up to your normal set temperature so it depends on how cold it has got. We can see the electricity use profile so know roughly how long it ...
I totally agree that K2 are worth it. They don’t look very different to K1 or P+ and are SO much more effective. Moving to K3 is a different step in b...
I have no connection with them whatsoever but why not ask Brendon atfor advice & replacement? You’re in Cumbria and he’s well respected in the ind...
If you go into system view on the app it shows flow temperature and you’ll easily see the DHW heating which ramps to become above your DHW set tempera...
We have a 4kW array and a Sunnyboy inverter (still working very well from original) and FIT. You need to ensure you get an AC coupled inverter into th...
If after reaching its minimum level continuous operation it cycles cleaning 80% on 20% off in an hour gradually reducing its on period to just ~15min...
For my part I was overwhelmed with the total number of questions. So I’ll answer a simple one: if one ufh zone is colder then yes you get it warmer ...
I think a room by room heat loss is a first step but with authority/discretion to include known upgrades without full documentation (one idiot would-...
If Vaillant produced a list of all of their various variables that would be valuable!
A snapshot of our 7kW Vaillant was at an OAT of 18C producing 1.1kW with 40% of the time on & 60% of time off. The lowest in continuous production...
- 26 Forums
- 2,221 Topics
- 49.3 K Posts
- 214 Online
- 5,881 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel
Im just in the process of connecting up my mixergy cyli...
By bontwoody , 1 hour ago
-
RE: How good is the app support for your heat pump?
I'm using smarthings for our Samsung 16kw, and it reall...
By DowallyDrifter , 3 hours ago
-
RE: Struggling to get above 3.3 on heating
You should be getting better than that at this time of ...
By JamesPa , 3 hours ago
-
Unless anyone can tell me differently, there appears to...
By DowallyDrifter , 4 hours ago
-
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
I run my Vaillant on either expanded mode (either end o...
By JamesPa , 6 hours ago
-
RE: Twin 10kw Grant Aerona Volumiser Tanks using lots of power
@adam Hi just jumped on this thread as I too have 2 10k...
By bretix , 15 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
on a facebook thread someone has comented to the effect...
By AdamK , 15 hours ago
-
The timing of training and inference are very applicati...
By wully , 16 hours ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
Wanted to add an update. As I am running HomeAssistan...
By bubuontheweb , 18 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
You are correct you dont need the second pump if there ...
By JamesPa , 18 hours ago
-
RE: New Fogstar 15.5kWh upright solution
From my experience with inverters from different Far Ea...
By Transparent , 19 hours ago
-
@bontwoody Thank goodness you are ‘back on-line’ so to ...
By Toodles , 20 hours ago
-
RE: Automation options to maximuse efficiency & ToU tariffs
@majordennisbloodnok Seems reasonable. It would be m...
By Batpred , 20 hours ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@hcas OK Thanks. Will do.
By bontwoody , 22 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
@transparent Thank you for a very comprehensive, tim...
By Batpred , 1 day ago
-
RE: Isolating the system for a planned power cut
@transparent 😊 I may have lost you there.. I ...
By Batpred , 1 day ago
-
-
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH
Where is the noise coming from. If its the pump then p...
By JamesPa , 1 day ago
-
The Mars and Richard Kitchen Show
Just stopping by to say: 1) Mars I'm so sorry that yo...
By Lucia , 2 days ago
-
RE: Electricity price predictions
Without getting too much into politics, given that the ...
By Batpred , 2 days ago