Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jun 10, 2026
I only ordered mine in November so I should be good. I didn't know I could connect to the battery or the BMS via bluetooth
DO you know how long this has been fitted or how I find out which one I have fitted? The Solis app shows the volts the battery is charging at and it...
The Solis inverter has an amp setting on each period. I currently have mine set to 50A for the main cheap rate period then at 0A for the first half ho...
So voltage is a reasonable way to determine what is too high and too low even if there is a small window inbetween?
Yes, very similar to that and it was hard work to get into place. I put a temperature gauge on the pipes last night, measuring the flow and return ...
Thank you, it is good to know that the figures do in fact line up. The tables I found on line were on various battery suppliers website and although t...
I bought a pre built battery and don't know which BMS it has. I did ask them if the battery would be compatible with the inverter before I ordered th...
Thanks for the detailed response Transparent but I don't think I have explain things very well. The volts shown on screen that is on the battery and...
I've only just seen this thread, although I've only had eveything connected up for about 6 weeks. I have a Fogstar 16kWh battery, 7.6kWp solar arr...
@editor, Can the pipe be too large? We have 32mm to our HP with a 5kW heapt pump. Apart from the cost and the amount of water that is in the pipe los...
Happy birthday and thank you @editor for everything you put into making RHH what it is today. It has helped hugely in my understand of heat pumps and ...
SPONSORS
Degrees of Separation
Latest Posts
-
@jamespa Also this coming winter I am going to run my c...
By kilgorexv , 4 minutes ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 4 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 12 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 12 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 14 hours ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 1 day ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 4 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 5 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 5 days ago
SPONSORS
