Activity
 
Notifications
Clear all
Johnmo
@johnmo
Member
Noble Member
Joined: Jan 25, 2023
Last seen: May 20, 2025
Topics: 2 / Replies: 524
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

I was looking at electricity usage the other day and the heat pump dryer was on, that cycles also.

6 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

In the grand scheme 2 or 3 starts an hour is good. It's what it's designed to do. During the cycle it just maintaining floor temp. If you never let ...

6 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

What do you mean by that, how often on and off per hour?

6 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

Yes, but if you don't have zone valves etc, heat pump just ramps up and down temp as required to the single zone. I use the same input on mine to ramp...

6 days ago
Reply
RE: Renewables & Heat Pumps in the News

But if heated by immersion does not comply with the grant rules as it states heating and DHW need to come from heat pump. Think they withdrawn the low...

6 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

Hi James, I would slightly disagree with this and maybe we are outliers due to our location but wind is a huge factor for us, which means I also agree...

6 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

My boiler had that control, unfortunately with thick screed UFH, the boiler spent the whole time completely out of sink with the house needs. Was pret...

7 days ago
Reply
RE: Renewables & Heat Pumps in the News

still not fully convinced everyone needs a heat pump. Storage heaters are a sound technology, suited to a lot of property especially flats. A small fl...

7 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

Cycling is a normal activity of heat pumps and boilers. As long as it's not short cycling (1 to 2 minutes or less on off cycling) ideally it will cycl...

7 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

Our is similar, so you are on UFH? I found when I was doing batch heating a very low hysterisis worked wonders. I also do hybrid heating when really...

7 days ago
Reply
RE: Commencing on an ASHP Installation Process

We have a summer house connected to the main house heating. The initial idea was to have it heated all the time, same as the house, but it soon became...

7 days ago
Reply
RE: Grant Aerona3 - Home Assistant control via Modbus

Best this I added to my system, you can really see what does and doesn't work. I have a full heat meter and electric meter installation.

7 days ago
Page 3 / 44
Share:

Join Us!

Trusted Installers

Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.

✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available

👉 Find your installer now!

Latest Posts

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security