Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 16, 2026
Hi I will give it some thought but in the mean time I found these capacity tables, basically its 7kW in practice. I have no recollection w...
Firstly very well done indeed for actually doing something leftfield. If nothing else it proves that heat pumps arent so mysterious, tehy are just a ...
Yes. I used data from Home Assistant and a Shelley to capture data last year and this year Im back with Octopus (not because of the data download,...
I think you said its an 11.2kW model and your house is a bit over 8kW. Thats certainly a bit oversized but not unusual by any means. In reality heat...
@chimpy Welcome to the forums. Firstly can I say that many people do have excellent experiences with Mitsubishi heat pumps and I am sure you cou...
Unless you have unscrewed them from the valves then it depends on the room temperature, TRVs close or open according to room temp. I think 3 may be a...
These will be ones that are at a state of almost closed. The water whistles through. I have occasionally experienced the same with LSVs but a tiny t...
Acoustic decoupling with flexible pipe, very possibly. It depends on whether the noise is water borne or pipe-borne. The best bet would probably be...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
And yet we almost all of us do exactly that when buying...
By Majordennisbloodnok , 3 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 19 hours ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 1 day ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 1 day ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 1 day ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 1 day ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 2 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 2 days ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 4 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 5 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 5 days ago
SPONSORS
