Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 16, 2026
The right approach IMHO, assuming he follows through. 'Thrown the industry into chaos?' the video says, and 'caught the industry by surprise'. I onl...
@trebor12345 Thanks for this. @marcexec I scrolled through and what sticks out immediately is the extent to which they have shrunk the R290 prote...
Thats great news and indicates that (subject to any discoveries during the next season) the capacity of the heat pump itself is not under specified. ...
I also am not too confident. There is not much data and the resolution of the data is poor. However there are other reasons to suspect the house los...
@gajolos I havent fully followed this but as I understand it you have two apartments, the downstairs one is heating sufficiently, the upstairs one ...
As a matter of interest how and to what level are they accurate? What would be the deviation between the reading of the two sensors if placed adjacen...
Why on earth not just measure current drawn and voltage, assume a power factor, job done. If Shelly can do this in a device that retails for gbp13 an...
@ecoste I totally understand your frustration. Im not sure I can help much with that unfortunately. Frustrating though this may be unfortu...
Based on what several others have said here and elsewhere my understanding was that it adapts, but only to a fairly limited extent. I have never been...
[/quote] In that case no surprise COP is only 3.1 if my understanding of autoadapt is correct. What is the current set value for minimum target fl...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
The concept of one agency doing the heat loss survey an...
By ian33a , 2 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 15 hours ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 20 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 22 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 1 day ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 1 day ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 1 day ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 2 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 2 days ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 4 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 5 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 5 days ago
SPONSORS
