Activity
 
Notifications
Clear all
JamesPa
@jamespa
Moderator
Illustrious Member
Joined: Apr 3, 2023
Last seen: Jul 14, 2025
Topics: 16 / Replies: 2621
Reply
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature

I have been trying to work that out from the photos. Still not sure, but like you I suspect that there may be one and it might account for a 10%+ eff...

4 months ago
Reply
RE: Anyone able to provide some feedback before I make my finale decision? Samsung vs Baxi vs Vaillant

How odd. Or maybe they have now realised that they are in a competition!

4 months ago
Reply
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature

Honestly no idea. The simple thermodynamics say that lower DT is always better. I have not heard a coherent explanation why we design for DT 5 not...

4 months ago
Reply
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature

Good I guess these operate the actuators on each loop but maybe one on each manifold operates the zone valve? If tyhere is nothing else to set high ...

4 months ago
Reply
RE: Volumisers in Heat Pump Systems: Does Placement Matter?

No, that wouldn't account for the flow temp being lower than the return temp. This shows that the water pump continues to operate and as a result the...

4 months ago
Reply
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature

I think what will actually happen is that the deltaT from flow to return will decrease. There may be a slight increase in energy to the house (becaus...

4 months ago
Reply
RE: Newbie: utterly confused with my Mitsubishi Zubadan air source heat pump running on 55C set flow temperature

If they arent permanently open then yes they would cause a problem (unless they are all wired to close simultaneously when the DHW comes on - instead ...

4 months ago
Reply
RE: Volumisers in Heat Pump Systems: Does Placement Matter?

Sofaik all others do the same, ie they operate the refrigerant circuit in cooling mode to effect defrost. They thus cool the house and warm the heat ...

4 months ago
Reply
RE: Volumisers in Heat Pump Systems: Does Placement Matter?

Are you sure. Where does the defrost energy come from on that case? Most stop the fan but leave the primary pump going thus extracting the defrost ...

4 months ago
Reply
RE: best approach for primaries?

Personally I would want them inside the heated envelope if possible. Then the heat loss is useful during the heating season. Obviously its a bit sit...

4 months ago
Reply
RE: help with new bathroom and towel radiator

I persuaded my installer that heat loss from the adjacent hallway plus steam when you actually take a bath/shower was sufficient (in order that we did...

4 months ago
Page 46 / 221
Share:

Join Us!

Latest Posts

Members Online

 No online members at the moment