Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 17, 2026
At this stage I would say no as gross underestimation of the loss is not the most likely cause of the problem. More likely causes are (a) the heat...
I cant see how that is the case if the earth is provided by means of a bond to the metal outer sheath of the incomer; no cut (other than one in your d...
Thanks for the clarification.
OK, TBH I dont know enough about MLCP to comment with any authority. The simple message so far as I am aware is: Nothing inherently wrong with plasti...
Peak Energy Products most recent accounts (to June 2024) make interesting reading. Im not an expert by any means, but their assets are almost entirel...
To answer this properly you need a heat loss calculation. Then you can work out how much flow each radiator needs which will tell you what diameter p...
Definitely please! Is that a plate heat exchanger above the bucket. Can you tell whether it is connected to the DHW or to the space hea...
Firstly welcome to the forum. From the preceding posts on this thread you may have gathered that this unit appears not to 'expose' the key parameter...
On reflection your description (which I understood) made more sense than the diagram (which I don't). The diagram seems to have two contacts/switc...
Thanks, equally useless uinfortunately It appears that the controls for this heat pump are different to almost all others on the market and, from wh...
Hmm. There maybe some more controls on the control panel itself. Manual (of sorts) here The manual is very light indeed on detail, they either didn...
Thanks for the screenshot. Thats pretty useless (no criticism of you!) because it doesnt tell us the flow temperatures (ie the temperature of the hot...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Heat Pump deployment statistics: June 2026
To my eyes, sat behind all of this is a basic policy ma...
By Temperature_Gradient , 9 hours ago
-
Thank you @majordennisbloodnok – that means a lot, part...
By Mars , 13 hours ago
-
We’ve just passed 20 million forum views! 🎉
It's official. The Renewable Heating Hub forums have of...
By Mars , 13 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
That calculation is reasonable, output is proportional ...
By JamesPa , 15 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
Have you looked at the Nibe website? They list their ap...
By Lizzie , 16 hours ago
-
RE: Why are ASHP installs so expensive?
A not unreasonable position and it wouldn’t be mandator...
By AndrewJ , 16 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 2 days ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 2 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 3 days ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 3 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 3 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 3 days ago
-
SPONSORS
