Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jun 27, 2025
That average use seems low - or we use a lot? The last 13 months of data from our smart meter, tumble drying, car charging, dehumidifying an outbuil...
My guess - gas will rise to 10p/kWh, electric will go up to 32p/kWh - but those are just figures I've pulled out of thin air. A SCOP of 3.2 will lea...
I think we need better education for consumers (most, my wife included, wouldn’t know what a kW is, they just want to be warm) and better education of...
Encouraging to see them publish such a good collection of data points. Thanks for digging that up.
On the topic of ratings, have a look at this rating plate for a 5kW ecodan - note the actual maximum is quite a bit higher than the model number sugge...
This is so true - when average Joe doesn't understand what a unit is, average Joe is really in for a shock when these energy prices go up yet again in...
Ah, the old servicing to maintain warranty scam…. yeah, I wouldn’t bother. It’s not like a combustion appliance that might gas you to death. It’...
Upstairs is cold for one of three reasons: 1. Undersized emitters compared to the ground floor - flow temp designed for downstairs emitters 2. Poo...
That's unfortunate, but the nature of the beast with any sort of refrigeration in a domestic environment over here. Look at the US, HVAC tech's everyw...
No experience of that particular unit, but remember that with regard to running costs, all you've got to manage is an SCOP of 3.55 and you're at price...
Well, if we’re going to get onto the topic of overpriced heat pumps 😂 after all it’s just a fridge really
@cathoderay I’ve read your thread completely, I’d bin that plate off at the first opportunity, can’t see the point of it at all.
- 27 Forums
- 2,750 Topics
- 64.7 K Posts
- 2,380 Online
- 7,157 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Have you ran the numbers as to which ...
By Papahuhu , 35 minutes ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 2 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 4 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 4 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 5 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 22 hours ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 22 hours ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago



