Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jun 27, 2025
The issue with outback stuff, or at least the legacy stuff that I've got is the closed nature of their communication protocol. They do make a sunspe...
Outback was started by Robin and Bob Cudgel (spelling) who were engineering leads at Trace before they were purchased by Xantrex. The 'Outback name ca...
@transparent I’m not, but you can stack multiple ones in parallel (an installation that I wired up and commissioned for another Dorset resident worked...
I know they are furiously expensive and enormous, but I’ve been running on Outback products exclusively since 2007 without a single issue. utterly ...
@zoomuno I would genuinely recommend you ask Brendon to cast an eye over this install to see what improvements can be made (there will be many) - you'...
@katcesca ah, yes that's a complication....
@tried2fail you need to ditch the heatmiser neostats and get the midea controller moved into the habitable space and get the system running on that, a...
The bunding regs only apply when you are a certain distance to a watercourse, many oil supply companies get that wrong and tell you that all tanks nee...
Ebay and Facebook marketplace are the best outlets. Stuff the package on there for £500 start and you'll sell it. Expect it to make around £1500 (imho...
Not B&B, but my builders are doing a class Q conversion at the moment and they laid a couple of lengths of 32mm pex-al-pex in between the layers o...
Stick with oil, it currently is and likely will continue to be the cheapest way to heat a property for a good while yet. Leave your current rads, inst...
Your usage figures seem about right, for example in November that is only 31kWh/day. If the ASHP was working at a COP of 3, that would be 93kWh of Hea...
- 26 Forums
- 2,658 Topics
- 62.2 K Posts
- 235 Online
- 7,060 Members
Join Us!
Directory
Latest Posts
-
RE: Indevolt Batteries UK Support & Info Thread
@editor thank you. Yes I'm prepared to wait. Don't need...
By iRadiate , 3 minutes ago
-
RE: The Reality Behind a Failed Heat Pump Installation – and an IWA Insurance Rejection
"The method used to sell this insurance, where someone ...
By EtchedPixels , 38 minutes ago
-
My pleasure, @davidalgarve. In fact, I posted a thread ...
By Majordennisbloodnok , 60 minutes ago
-
@jamespa I am all for pre engineering… Would I be ...
By Batpred , 2 hours ago
-
RE: Who Actually Owns a Heat Pump in Britain? We Asked. Here Is What We Found.
I am getting my house ready for a heat pump. In the las...
By Fred Gray , 2 hours ago
-
RE: Rate the quality of your heat pump design and installation
@trebor12345 Good to hear of another satisfied Cinergi ...
By Toodles , 4 hours ago
-
RE: Cooling with air to water heat pumps
On the two huge (10m² each) south facing windows I inst...
By bobflux , 6 hours ago
-
RE: GivEnergy inverter tripping due to over-voltage?
@transparent I don't think Axle have any involvement...
By Tim441 , 6 hours ago
-
RE: Rural burning – I've had enough
Same here in Finland. It's strictly forbidden ...
By upnorthandpersonal , 1 day ago
-
RE: Renewables & Heat Pumps in the News
Something worth flagging... we've just published a news...
By Mars , 1 day ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
The Homeowners' Q&A podcast is back... I've changed...
By Mars , 1 day ago
-
RE: Anyone concerned about GivEnergy?
I have already signed up with Axle so yes, that takes c...
By KevH , 1 day ago
-
@batpred Would it pass the airbnb feedback test no. I...
By EtchedPixels , 2 days ago
-
A quick update... we've just launched the beta version ...
By Mars , 2 days ago



