Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jun 27, 2025
@heacol I suppose on a new system with new rads and new pipework, some inhibitor and simple Strainer will suffice?
@heacol system filtration? I’ll stick the flow setter on eBay.
@heacol I recently ordered a 28mm fill/flush/flow setter valve and was shocked at how small bore it was internally. Don’t know if I’ll bother fitting ...
@heacol taking control of the heat pump over modbus?
I'd also advise you stick with a gen6 instead of going for the more expensive HTQ, it's small enough to go through PD, unlike the HTQ
Buy the unit from Midsummer wholesale, and get your plumber and electrician to follow their supplied installation instructions, you'll end up with a g...
@morgan if you are on iOS then I can recommend the seek thermal. It’s much better than the flir one.
@morgan yep they are usb-c only at present. The iOS version is ‘coming’ Seek thermal compact pro here, decent but low frame rate. I imported the inf...
@morgan yep, the infiray p2pro is the best bang for the buck. Not crippled by the stupid US export restrictions on frame rate and has a decent sensor....
Completely different set of regulations covering the automotive application of F-gas…. So different that you don’t need to be f-gas registered to work...
@allyfish your point being?
@cathoderay I don’t see the issue here then? Freedom have taken the register map and built a product (FHPCloud) out of it and some off the shelf hardw...
Latest Posts
-
RE: Rate the quality of your heat pump design and installation
@trebor12345… thanks for sharing! Really valuable info ...
By Mars , 1 hour ago
-
RE: The Reality Behind a Failed Heat Pump Installation – and an IWA Insurance Rejection
@batpred spot on.When a consumer agrees to an insurance...
By Mars , 1 hour ago
-
RE: Indevolt Batteries UK Support & Info Thread
@editor thank you. Yes I'm prepared to wait. Don't need...
By iRadiate , 1 hour ago
-
My pleasure, @davidalgarve. In fact, I posted a thread ...
By Majordennisbloodnok , 2 hours ago
-
@jamespa I am all for pre engineering… Would I be ...
By Batpred , 3 hours ago
-
RE: Who Actually Owns a Heat Pump in Britain? We Asked. Here Is What We Found.
I am getting my house ready for a heat pump. In the las...
By Fred Gray , 3 hours ago
-
RE: Cooling with air to water heat pumps
On the two huge (10m² each) south facing windows I inst...
By bobflux , 7 hours ago
-
RE: GivEnergy inverter tripping due to over-voltage?
@transparent I don't think Axle have any involvement...
By Tim441 , 7 hours ago
-
RE: Rural burning – I've had enough
Same here in Finland. It's strictly forbidden ...
By upnorthandpersonal , 1 day ago
-
RE: Renewables & Heat Pumps in the News
Something worth flagging... we've just published a news...
By Mars , 1 day ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
The Homeowners' Q&A podcast is back... I've changed...
By Mars , 1 day ago
-
RE: Anyone concerned about GivEnergy?
I have already signed up with Axle so yes, that takes c...
By KevH , 1 day ago
-
@batpred Would it pass the airbnb feedback test no. I...
By EtchedPixels , 2 days ago
-
A quick update... we've just launched the beta version ...
By Mars , 2 days ago
