Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 13, 2025
Just an fyi not saying it won’t work but auto adapt was specifically designed to work with rads, Mitsubishi do not recommend it to be used with UFH du...
In short yes auto adapt works very well but will sacrifice efficiency as you have noted, it runs hotter as it’s trying to achieve the room temp set as...
@neilhighland it won’t really matter what heat pump make you have installed although vaillant do seem to be the preference for heat geeks. What is mo...
It was specifically how the 2 units work together in tandem if you look at urban plumbers recent video he installs 2 NIBEs for the first time
Not rating my own system but had a visit from a heat geek the other day I asked if he was coming to a new install what heat pumps would he install. H...
I think you are both correct, its because systems aren't designed, they are plumbed in by people who don't understand system design but attend a manuf...
Your welcome. To clarify what I meant by 1 big loop was that all the loops for the different areas should be open at the same time not that it shoul...
This is only my opinion and experience so beware. We did exactly what you are proposing refitted kitchen turned into entire downstairs floor remova...
I doubt it could go in the alleyway anyway as it’s going to be within 1m of the boundary so won’t meet permitted development requirements
OE don't offer savings sessions its the National Grid, OE just bid to take part, these are test sessions to collect data its not a real demand
What model is the heatpump, have you checked what the minimum flow rate is for your heat pump 17l/min doesn't sound like a lot for a 12KW unit especia...
@pingu807 Sounds like its got an issue then, best to call mitsubishi tech support
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
Posted by: @jamespa Whilst I don't like determining ...
By Rob of York , 14 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 22 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 1 day ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 2 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 2 days ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 2 days ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 2 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 7 days ago
SPONSORS
