Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 13, 2025
Agree with John, forget how you used to run your boiler, last night it was between 7-10°C outside, my heat pump came on at 12am ran continuously for 6...
I’m on IOG at 7p off peak have heatpump, solar and battery my total peak electrical consumption last year was 200kwh costing £60. I was looking at ge...
Neomitis have their own app Myneomitis, so depending on the thermostat model you have you may be able to connect to it remotely.
@tufty Also make sure that you have the heating timer set up for that length of time as well otherwise the timer will cut it off as well but at least ...
@tufty That will be your problem then, just change it to 2 hours, its using the immersion as you have restricted the run time of the heat pump to he...
I agree with Johnmo, 55C is right on the limit of immersion being required for the Ecodan, did you increase the DHW set temp in Jan 24, as that would ...
@ellyse Zoning refers to shutting off part of the heating system emitters e.g. having thermostats closing off UFH loops in certain rooms or TRV's clos...
@ngillam No hot water is unaffected the heat pump just turns back to heating for hot water and back to cooling when its finished. What you do ha...
Cooling is really easy to set up on the Ecodan. Turn off the power to the heatpump and the control unit, unscrew the front panel of the main controll...
hopefully the heat loss is less than calculated and the living room will be warm enough at lower flow temps not a lot else you can do you seem to have...
Why is the bedroom rad over twice what is required yet the lounge barely covers the heat loss. I may be talking rubbish but logically doesn’t that sa...
I just use the timer on tne main ecodan controller it’s set for 2 hours overnight and no reheat set to 48C and the tank lasts family of 4. 2 showers, ...
- 27 Forums
- 2,758 Topics
- 64.9 K Posts
- 1,335 Online
- 7,162 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay Good bit of analysis. Daily wou...
By JamesPa , 49 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 18 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 23 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 2 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 2 days ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 2 days ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 2 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 7 days ago



