
Last seen: Feb 10, 2025
@mike-h I've a 12kW Gen6 Samsung and my experience is the same as yours. I don't have any MMSP monitoring but know by calculating from my own temperat...
@potatoman This postmay also help you.
I've a similar challenge to yourselves - no fancy monitoring over and above what my Samsung controller is telling me. However, I do have a few cheap t...
Hello @bretix Yes, it's been a learning experience for me with Samsung control. My system did operate in tandem but I knew from experience I did...
Hi @mrj. I certainly wish I'd spent some time really understanding my heat loss situation, and how the system as a whole was being designed but - as w...
Hello @swanny. I've a 12kW Samsung Gen6 (actually two) so will just add my settings by way of comparison. After some trialling my weather compensati...
Hello @mrj. @iancalderbank is correct. I've 2 x 12kW Samsung units operating as 'master' and 'slave' which aren't particularly efficient and the syste...
@iancalderbank Yep, 4kW is probably about right as a minimum. I've not measured generation at that end of the scale but the lowest stable power consum...
Hi @tobyg. We've two of those Samsung models, installed Feb 22. I did understand that, at the time at least, they were amongst the quietest availa...
Hello @editor. I've a similar situation to you, it's on my list to renovate the driveway after all work on the house is finished later this year. Ou...
Hi @josephiah. I do use night time set backs in the shoulder season as it's a little warmer and everything can react quickly enough. I use a higher W...
- 23 Forums
- 2,098 Topics
- 46.2 K Posts
- 268 Online
- 3,385 Members
Latest Posts
-
RE: Ecodan consuming 100kwh per day in new build!!!
@anca1808 I have just reviewed the whole thread. In s...
By JamesPa , 32 minutes ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 11 hours ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 11 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 18 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 23 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 1 day ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 2 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 4 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 4 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 5 days ago