Last seen: Sep 19, 2024
I think that a defrost is likely to cause an increase in reading from the OAT sensor, because not only is hot refrigerant gas being pushed through the...
@iancalderbank A sensor should not suffer from 'wind chill', since it is not a heat source.
@cathoderay One of the problems with correctly analysing the data from your system is that we don't know the true OAT. I think that most correctly...
If you remove the insulation from around the flow rate indicator, you should be able to see details of the make and model. Google these details and se...
Based upon the available information, I would say your assessment looks to be correct. One thing that I learned many years ago is that people can ma...
As CR has stated, those are indeed defrost cycles, though I suspect they are being exacerbated by the two major problems from which his system suffers...
It is always good to see charts from correctly operating heat pump systems.
If my understanding is correct, it may be the temperature to which the refrigerant gas falls within the evaporator before the build-up of ice is suffi...
What is the actual temperature at the radiators and what is the temperature drop across the PHE?
@scrchngwsl If you wish I will post a copy after I have updated for the OHS capability.
Has the controller been correctly optimised?
@scrchngwsl Well done. It looks like you are getting there. If I am understanding your formulas correctly, they should produce somewhat similar re...
Latest Posts
-
RE: New Fogstar 15.5kWh upright solution
Easy to spot the second collaborator. 🤣 So w...
By Batpred , 3 minutes ago
-
RE: Say hello and introduce yourself
@velcro welcome to the forums. Please feel free start a...
By Mars , 14 minutes ago
-
RE: Speedcomfort radiator fans
I watched the video to see whether they'd potentially b...
By Sheriff Fatman , 33 minutes ago
-
I will report back with an update on ours in due course...
By Sheriff Fatman , 37 minutes ago
-
RE: Mitsubishi Ecodan R290 10kW performance
@ecoste For what it's worth, this is my equivalent data...
By Sheriff Fatman , 1 hour ago
-
Daikin EDLA11D3V3 DHW Settings
I have a newly installed EDLA11D3V3 which I'm still get...
By Velcro , 1 hour ago
-
RE: Setback savings - fact or fiction?
Will come back to the above points, but for now, I've j...
By cathodeRay , 2 hours ago
-
@jamespa I have found that it comes as a shock when we ...
By Toodles , 3 hours ago
-
RE: My Powerwall 3 Consumes 3-4 kWh/Day in Self-Consumption: Is This Normal?
I suspect a good chunk of the "losses" are power consum...
By Bash , 4 hours ago
-
RE: Need Help Optimising My Rushed ECO4 Install: 12kW Bosch Heat Pump
Hi @mickamills . Welcome to the forum. It sounds like...
By bontwoody , 5 hours ago
-
RE: Midea ASHP – how to set weather compensation
@curlykatie did you get sorted with this?
By MickaMills , 5 hours ago
-
RE: External pipework insulation
@transparent I hope you are not being admonished @trans...
By Toodles , 5 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
The FT levels off at either the set point OR the minimu...
By AndrewJ , 1 day ago
-
RE: MyVaillant Connect Regular Disconnect
Thanks. Yes, if the time is consistently 11pm every nig...
By buckwem , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@transparent Thanks, this helps. Could it be that St...
By Batpred , 1 day ago
-
RE: Clivet ASHPs and weather compensation
Simon did share a lot of very helpful advice. On furthe...
By ambris , 1 day ago
-
-
RE: Advice on internal circulation pump noise
Extend the primary branch and make sure you have more t...
By ASHP-BOBBA , 2 days ago
