Last seen: May 2, 2025
csn you post the pictures again, but just have flow temperature and return temperature showing. this is the important temp in the primary flow snd ...
I’d also listen to James, he gives good advice. i didn’t mean to concern you, and I’ve seen the 14kw zubadan modulate quite low on heat pump monitor...
@sandman1600 if your house is 130m2 and you have a 14kw mitshi machine....... I would be staggered if it wasn't oversized. that's 107w/m2. that's a re...
@sandman1600 Hi, this is all tricky. One thing I wold say is to give the house time. When running the heating very low and slow, it can take...
@gary yeah, more than that. about 1000-1200w, ive never really seen it go below that. and that's with the compressor bumbling around 30hz,
@gary 11.2kw for 260m2 house. its tight on the heat loss at the cold end, but in mild and a bit cold weather, works well
@gary i can see a blending valve on the manifold though. Whats that set too? and here is my floor ticking over at 27ish degrees
@sandman1600 you've got a 14kw in a 130m2 well insulated house. I think you might be oversized there too. I've an 11.2 KW heat pump in 260m2 average ...
@sunandair This is about as good as I can do
@sunandair sure, happy to make a sketch. I think I have done one somewhere but I’ll try to do a prettier one. I think my system is working generall...
@sunandair my graphs look similar on my ecodan. And when you make it 2 defrost and hour...... you can see how they struggle
@jamespa Hi James, on this topic: you've given good advice to me in the past and I'm working through things with my heat pump set up with th...
Latest Posts
-
RE: Why do we need pressurised systems?
@toodles Is that because the AI has searched the forum ...
By Old_Scientist , 58 minutes ago
-
OK... I'm here. But the amount of my time needed to add...
By Transparent , 2 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 7 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 15 hours ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 20 hours ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 22 hours ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 24 hours ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 2 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 2 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 3 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 4 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 4 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 4 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 4 days ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 4 days ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 5 days ago
