Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Dec 4, 2021
Whilst it’s quiet then 🙂 I just had this from my ASHP installer when I asked them about weather compensation mode - I have a LG Therma V, with UFH ...
I just had this from my ASHP installer when I asked them about weather compensation mode - I have a LG Therma V, with UFH downstairs and radiators ups...
I asked my installers about switching to weather compensation mode This was their feedback: "When we have rads and UFH working together we tend to...
hi @derek-m sorry for the delayed response, we've both been struck down by a cold You should have been provided with instruction manuals for all ...
@derek-m Thanks. What would be useful for me to share with you? I don't have any schematics etc.
I have been trying (and failing, impossible on my phone) to keep up with the chatter in here. As someone who is actively monitoring my electricity usa...
@derek-m We have a central control unit in a cupboard with the hot water tanks. The hot water is heated at intervals during the day, 12-3pm, and...
@derek-m thanks! We have a LG Therma V ASHP
I’m seeing lots of comments regarding weather compensation is how you should be setting up the ASHP. Currently my heating is all controlled by zone...
@caroline2000 Are you heating your water tank 24/7 or have you set the ASHP to heat the tank at intervals during the day? We found that was costi...
Heating Zones Our downstairs is all open plan, and the heating of it is split into zones. The kitchen is on a zone and the living/dining room are on...
Quite surpised seeing some high figures, considering the time of year. Our average usage / cost for May worked out to be: an average of 6.9kWh per day...
- 27 Forums
- 2,758 Topics
- 64.9 K Posts
- 782 Online
- 7,162 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 22 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 6 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 11 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago



