Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

cathodeRay
cathodeRay
@cathoderay
Moderator
Famed Member
Joined: Feb 28, 2022
Last seen: Sep 9, 2026
Topics: 18 / Replies: 3023
Reply
RE: The death of the ASHP?

FWIW, I have just calculated my global (heating and DHW combined) COP from 25th Nov 2022 (when I started collecting sufficient data) to the beginning ...

4 years ago
Reply
RE: The death of the ASHP?

No, it was just a sort of global in the middle figure, a general case, for a general case estimate. I suspect mine is less. The trailing three hour mo...

4 years ago
Reply
RE: A Beginner's Guide to ASHP Monitoring

@majordennisbloodnok - you make a very good point, I haven't made it clear enough that this is all voluntary, you don't have to do it. I will make an ...

4 years ago
Reply
RE: The death of the ASHP?

Mars - that's a huge amount of oil - I used not that much more (between 1000 and 1200 litres over a whole heating season to heat my old leaky building...

4 years ago
Reply
RE: The death of the ASHP?

Fair point, but it currently means ASHPs and oil are neck and neck per kWh. I may or may not have been a bit generous with the COP I used, and a bit h...

4 years ago
Reply
RE: The death of the ASHP?

I don't think so, at least for oil, don't know about logs. Assume: cost of electricity = 34p per kWh used, COP of 3.5 => cost per delivered kWh =...

4 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

@tried2fail - good to hear it is working. Note I changed the line of code that does the produced/used division a few times, trying to get it to stop p...

4 years ago
Reply
RE: A Beginner's Guide to ASHP Monitoring

They, monitoring and controlling, are interconnected, sometimes only one letter separates them (get LWT/set LWT). Sometimes you need to get (monitor) ...

4 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

@tried2fail - Perhaps I should also add that the entities prefixed with 'Heat Pump Wi-Fi Controller...' come from the python module, while the bottom ...

4 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

Yes I did, thanks for reminding me, but I don't recall it being a critical error, or maybe I didn't need to restart HA, and so I didn't trigger the co...

4 years ago
Reply
RE: A Beginner's Guide to ASHP Monitoring

Don't give up so easily! I was merely setting the level you need to be at, and said if you are not there yet, all you need to do is "bone up on these ...

4 years ago
Reply
RE: Connecting to Midea MSmartHome using a PC

I can certainly manually record data values from the wired controller, but some of them are very volatile (actual LWT/RWT, current draw, capacity (out...

4 years ago
Page 215 / 254
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Members Online

Click to access the login or register cheese
Protected By
Shield Security PRO