Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Mar 3, 2025
Tweaked the weather comp settings removed all the Tado room stats and UFH zones so it’s just one big zone now balanced the radiators i have ...
Lower flow temps help avoid defrosts I think! Can you run for longer at lower flow temp?
We made £7.57 (91% reduction in usage). Impressed with that.
Sounds like the universe gave you a nudge! im sure it’ll be fine.
it was running at about 33c before I turned it down. After an hour it turned it back on and it climbed to 38c for 2 hours then back to 36c But a...
We got down to 170w when we turned everything off. It seems the WiFi router and CCTV take up quite a bit! The temperature in the house only shifted ...
Thanks all. I will do some measurements and also try opening some valves i did try turning the pump down from 3 to 1 but the delta didn’t shi...
I’ll be turning mine down yes it could cost a bit more the following hour (and ours is in room adapt so it’ll adjust flow temp upwards slightly)...
@derek-m Thanks Derek Were in Weather Comp mode. 45c @-2, 25c @ 12c This has been fine, but I have bumped it up +4 this week with it being w...
- 27 Forums
- 2,768 Topics
- 65.2 K Posts
- 947 Online
- 7,170 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
The concept of one agency doing the heat loss survey an...
By ian33a , 12 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 14 hours ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 19 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 21 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 1 day ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 1 day ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 1 day ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 2 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 2 days ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 4 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 5 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 5 days ago



