Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Halved our ASHP energy consumption
So I checked our Ecodan consumption figures yesterday
All of 2021. Approx 9,000kwh
2022 so far: Approx 4,000kWh
Roughly COP for Nov has gone from 2.7 to 4.3 Not sure how much milder it’s been this year?
With 7 weeks of year left it’s looking very promising!
We tuned things before the heating season this year so I’m hoping that means 2023 will be even cheaper with a full year at a better COP
250sqm house. 30kWh Sunsynk/Pylontech battery system. 14kWp solar. Ecodan 14kW. BMW iX.
My latest energy bill for Oct-Nov was just £134 (then take off the government money). So far, so good for this year. I'm about £1000 in credit at the moment. It has been ridiculously mild
Posted by: @mjrThe start of Nov has been fairly mild.
What tunings have you tried, please?
Tweaked the weather comp settings
removed all the Tado room stats and UFH zones so it’s just one big zone now
balanced the radiators
i have a feeling removing the zoning has worked the best
250sqm house. 30kWh Sunsynk/Pylontech battery system. 14kWp solar. Ecodan 14kW. BMW iX.
I too have an Ecodan and would be interested in the weather comp settings you use.
thanks
It’s 2c here and foggy. So worst weather for ASHP
Flow temp is 42c. No defrost in last 24 hours and house is nice and warm.
will see what the COP is tomorrow when the figures come through to the app.
250sqm house. 30kWh Sunsynk/Pylontech battery system. 14kWp solar. Ecodan 14kW. BMW iX.
Posted by: @bensebIt’s 2c here and foggy. So worst weather for ASHP
Flow temp is 42c. No defrost in last 24 hours and house is nice and warm.
will see what the COP is tomorrow when the figures come through to the app.
Yes but what are your weather comp settings?
Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.
2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.
- 27 Forums
- 2,768 Topics
- 65.2 K Posts
- 1,684 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 22 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
Hope you are hearing from a good source? Call me old ...
By Batpred , 25 minutes ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 2 hours ago
-
RE: Why are ASHP installs so expensive?
It seems a quite comprehensive breakdown. I will try to...
By Batpred , 2 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 8 hours ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 10 hours ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 11 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 20 hours ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 1 day ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 2 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 3 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 4 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 4 days ago





