Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 26, 2026
Clearly some of these players are used to tap into the fossil fuel greenwashing cash (much of it foreign). The main goal is to divert and confuse. ...
This is what I answered, I really have no hope: "... to your questions: I had a registered electrician install the system a few years ago, who...
@majordennisbloodnok Good point! Just in case anyone reading this in the future needs that clarity. The sockets below are also for RJ45 but they are...
Yes, I just used a normal network cable. I think it may even work using the wifi the dongle connects to, important to allocate the IP address to the M...
😉 Yes, the signature goes everywhere... "Home Pro", they call it, it has been failing to charge the car.. Pro in Ohme lingo probably means "...
No worries Modbus may also work over the dongle WiFi access. Essentially it is available on TCP port 502.. I had a better look and the HA Soli...
Had another try with the "customer support" of my ev charger. Just in case there was new management. Or they had been bought by someone that cares ...
In my case, I have Home Assistant (HA) running in an old pc. HA connects to my local network. @majordennisbloodnok published a great overview here on ...
2 days uninterruptible power supply (at the moment) with Solis 8kW and 16kWh lifepo4
I just checked and the sensors from the solis modbus integration update every few seconds (10?) with the battery charge and discharge power. &nbs...
A more direct option may be to use a bluetooth or modbus integration to the BMS. The bluetooth option worked for me, on the seplos I could connect to ...
I must say I had not noticed the frequency until this morning as I was sending Solis some graphs on usage. They seem to trust Solis AI less than it de...
- 27 Forums
- 2,750 Topics
- 64.7 K Posts
- 2,090 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 8 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 9 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 14 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 16 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 16 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 17 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 day ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 day ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 3 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 4 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 4 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago


