Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 21, 2026
@majordennisbloodnok Good point! Just in case anyone reading this in the future needs that clarity. The sockets below are also for RJ45 but they are...
Yes, I just used a normal network cable. I think it may even work using the wifi the dongle connects to, important to allocate the IP address to the M...
😉 Yes, the signature goes everywhere... "Home Pro", they call it, it has been failing to charge the car.. Pro in Ohme lingo probably means "...
No worries Modbus may also work over the dongle WiFi access. Essentially it is available on TCP port 502.. I had a better look and the HA Soli...
Had another try with the "customer support" of my ev charger. Just in case there was new management. Or they had been bought by someone that cares ...
In my case, I have Home Assistant (HA) running in an old pc. HA connects to my local network. @majordennisbloodnok published a great overview here on ...
2 days uninterruptible power supply (at the moment) with Solis 8kW and 16kWh lifepo4
I just checked and the sensors from the solis modbus integration update every few seconds (10?) with the battery charge and discharge power. &nbs...
A more direct option may be to use a bluetooth or modbus integration to the BMS. The bluetooth option worked for me, on the seplos I could connect to ...
I must say I had not noticed the frequency until this morning as I was sending Solis some graphs on usage. They seem to trust Solis AI less than it de...
Ah, what do you need it fo
This is a simplified view of how we currently use the Solis inverter:
- 26 Forums
- 2,721 Topics
- 63.7 K Posts
- 3,246 Online
- 7,124 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
It's a great looking piece of kit and the 5kw is very q...
By avenir , 12 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
I can't quite get my head around part 7 in the Indevolt...
By BlizzardGreen , 12 hours ago
-
RE: Advice on my Heat Pump Journey: Old Stone Built Detached Cottage
Well deserved! 👌 55°C to the rads is really h...
By bobflux , 15 hours ago
-
Potentially a winner this idea if it can be made cheapl...
By JamesPa , 1 day ago
-
RE: Existing Solar Panel installation - structural roof calculation check
My own solar panel fixing rails wouldn't pass the MCS r...
By Transparent , 1 day ago
-
RE: Vaillant Arotherm Pro vs new Plus
So with the dedicated Hager CU, flipping the big red bu...
By Batpred , 2 days ago
-
Well I usually do it by feel, which is a slight problem...
By Transparent , 2 days ago
-
@jeff I am well aware of the riskiness of such investme...
By Toodles , 2 days ago
-
Fully understood and entirely reasonable! On the home ...
By JamesPa , 3 days ago
-
RE: Electricity price predictions
So I am really having difficulty trying to work out wha...
By bontwoody , 3 days ago
-
Ok Well almost certainly it could be used instead of ...
By JamesPa , 3 days ago
-
RE: Samsung heat pump - data cable issue
Samsung reference it as "RS485 - COMM" in my manual. ...
By Old_Scientist , 3 days ago
-
RE: SolarEdge SE5000H Inverter Failure
Update. My SolarEdge inverter was replaced yesterday wi...
By L8Again , 3 days ago
-
For cooling a whole building, or even a big room with l...
By EtchedPixels , 4 days ago
-
RE: Comms and power cabling to outside unit
@old_scientist 100%, the cover is for warrantied unit...
By Papahuhu , 4 days ago



