Last seen: Oct 2, 2025
Thanks, how hard was it wiring up? I have a gen6, and the MIM-H04EN seems to only mention air con? Or does Samsung use the same controller for ashp an...
Highest draw I've seen from it is about 5kw input via the instantaneous power menu , though I don't check it too often. From octopus half hourly it se...
Found it.....thank you Derek... it's the MVHR, turned them both off at the mains and all looks to be be resolved after 14 hours.After several hours of...
Just to update this thread, Joules came out & found that the temperature probes had not been pushed fully into the pocket within the tank.... inst...
No power diverter to my knowledge & yes - that is how I assumed the system would work. When it does 'kick in' the immersion looks to be what drive...
Good shout that, though I just checked it and it looks to be set to the max! 🙁 Joules supplied the cylinder, ASHP & commissioned it so all set to...
Just wanted to say your suggests seems to be working. I set an extra schedule from 4.01pm onwards for it to be "off" and from what I can tell it seems...
Joules came to commission, and were in and out before I had a chance to even register what he was doing. I wish I'd asked how to set holiday set bac...
Latest Posts
-
RE: Is Your House Warmer Upstairs Than Downstairs?
@jamespa I followed your advice and the room temperat...
By GrahamF , 8 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
This is what the specialist thought but looked...
By Crimson , 8 hours ago
-
RE: Faulty Clivet heat pump out of the box
Thanks for giving this post a bump @benson. I'm going t...
By Mars , 9 hours ago
-
@treewizard is this not the electrical pulse that keeps...
By ASHP-BOBBA , 9 hours ago
-
RE: Samsung Gen6 and Havenwise ........
I am no expert on this but on your gen 6 controller onc...
By Alfapat , 20 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@adamk these are called roll top rads, they were still ...
By AgentGeorge , 21 hours ago
-
If the Vaillant is a 7kw unit I’d avoid. Quiet outside ...
By AdamK , 21 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
It has it's uses and there is no way I could have set t...
By benson , 1 day ago
-
RE: Oil Boiler & Heat Pump Hybrid System
Thanks for the suggestion, but farmhouse is grade 2 lis...
By paultheheating , 2 days ago
-
RE: My DIY Heat Pump installation
This is very kind. However software is not really my ...
By Polar bear , 2 days ago
-
RE: Request for feedback on where we're at with our quest to get an ASHP or ideas.
thanks, heatpunk looks great, being able to do the calc...
By giryan , 2 days ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
It has been just over a year since we changed over to a...
By npru , 3 days ago
-
RE: Finding a Thermostatic Shower Valve That Works with Heat Pump Systems
@morgan I should just have written ‘Mea Culpa’ shouldn’...
By Toodles , 3 days ago
-
RE: Are We Sleepwalking Into Another Race to the Bottom?
'We learn from history that we do not learn from histor...
By Lawrence Leask FInstR , 3 days ago
-
Mitsubishi Ecodan FTC7 Legionella date set
I can set the number of days between Legionella cycles ...
By DRB01 , 3 days ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
@treewizard Yes, I like the extra facilities that NetZe...
By Toodles , 3 days ago
-
RE: My Octopus Cosy 6 Heat Pump Journey: From Quote to Completion
@editor thanks for highlighting my name. Yes I did get ...
By Chansug , 3 days ago
-
RE: balancing radiators with a mixture of different size pipework and a few undersize rads.
@editor Thanks for your input Mars. No I think the comm...
By baxtDave , 4 days ago
-
RE: Rate the quality of your heat pump design and installation
We’re looking to expand our list of recommended list of...
By Mars , 4 days ago
