Posted by: @editorIf you're new to the forums, we'd like to take this opportunity to welcome you. Please introduce yourself by telling us a bit about yourself and where you're based.
Hi, I’m Cathy and I’m in Essex. I’ve just had an air source heat pump installed this week and it’s all new to me. Currently my house is cold and my smart meter is rising as I watch! I have a Baxi heat pump and a Honeywell Home thermostat.
@cathyem1 welcome to the forums and sorry to hear that your ASHP is not running as it should. Can you please start a new forum dedicated to your system and tell us more about your system and set up?
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Hi looking to get ASHP this year been my goal since getting solar and batteries and just got go ahead from the boss before christmas.
Hello All,
New member here, just begun looking at a ASHP for our house. We’ve already got Solar panels, as of last March and they’ve definitely made a difference to our electricity usage.
I’m a retired BMS (Building Management Systems) engineer, formally employed by Schneider Electric, Satchwell and prior to that served my time as an electrician.
While I was working I never encountered a ASHP or even GSHP, it was always dual fuel boilers and conventional chillers so they are very much a black box as it were.
I’ll do plenty of reading, YT watching and no doubt be back with various questions.
Regardd,
Michael.
ASHP. It’s all to do with Specific Enthalpy.
Hi @maxthedog
That's a useful skill-set to bring to this forum.
Irrespective of the questions you might have, please feel free to dive straight into existing topics...
... especially where there are issues regarding building fabric and electrics.
We are going to be facing ever more respondents here who really ought to be moving to a 3ph domestic supply,
but haven't appreciated the need to do so.
Have a look at my comments here, for example.
Does your previous work with Schneider mean that you're in the Telford area, with NGED as your DNO?
Save energy... recycle electrons!
@maxthedog Welcome to the RHH, your experience and expertise will be very useful hereabouts I’m sure. We are a friendly group and no question is too trivial and rabbit holes are mined by quite a few members! Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Hi,
Thanks for the welcome Transparent, Toodles.
Spent my time in controls in their Yorkshire regions with the odd foray over ‘t Pennines, but nothing south of Sheffield.
I’ll get some calculations done and take a look at our Octopus numbers, then see what questions to ask.
Cheers,
M
ASHP. It’s all to do with Specific Enthalpy.
@maxthedog welcome to the forums. When you’re ready, please start a dedicated topic for your project.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Adam, based in Boston Lincs. been watching lots of the Heat Geek stuff but still not getting the feeling of confidence even from some HG affiliated companies.
Hi @adamk - We're pleased to have you here.
Are you contemplating a heat-pump installation?
Or do you already have one which isn't performing as you'd hoped?
Many of us gain confidence here by the very act of responding to posts from others.
It's the discussion itself which helps to shape our ideas, and gives insight into the underlying concepts.
Save energy... recycle electrons!
Hi all John based in Winchester, Hampshire. I’ve had solar on my roof for about 12 years now, 2 years ago added batteries and just over a year ago a heat pump! Have been struggling a bit with the heat pump journey ( poor installer plus refrigerant leak) but now hopefully in a position to fine tune.
- 21 Forums
- 1,959 Topics
- 42.5 K Posts
- 44 Online
- 2,272 Members
Join Us!
Heat Pump Dramas?
Thinking about installing a heat pump but unsure where to start? Already have one but it’s not performing as expected? Or are you locked in a frustrating dispute with an installer or manufacturer? We’re here to help.
✅ Pre-Installation Planning
✅ Post-Installation Troubleshooting
✅ Performance Optimisation
✅ Complaint Support (Manufacturer & Installer)
Latest Posts
-
RE: SolarPV tables / online calculator
By Gary , 25 minutes ago
-
RE: Newbie out of her depth – Samsung AE120RXYDEG 12kW heat pump
Same here @jamespa - we have a 12kW Samsung ASHP, solar...
By Old_Scientist , 9 hours ago
-
RE: Samsung Gen 7 R290 12kW is not behaving how I expected
Yes, that sounds correct. I would say try both options...
By Old_Scientist , 9 hours ago
-
RE: F.788 Building circuit pump reports internal fault - Vaillant Arotherm
Guess I have to wait for engineer visit. I really hope ...
By jeegnesh , 11 hours ago
-
RE: Setback savings - fact or fiction?
The great thing about science is that it doesn't care o...
By JamesPa , 11 hours ago
-
RE: Act now to defer the UK road tax increase on EVs
@majordennisbloodnok Damn right sir. my attempt at iron...
By Jancold , 13 hours ago
-
RE: ASHP and heating issues in new build house
That’s good gives you more capacity. It made me think, ...
By Terry1812 , 15 hours ago
-
RE: Seewet manhole cover within r290 exclusion zone
Thanks! I asked Vaillant, and they say I should be fi...
By dbrb2 , 17 hours ago
-
Looking for the Grant Aerona 3 setting to turn off completely at 20 OAT
I'm running my Aerona 3 on WC and the 'warm end of that...
By damonc , 18 hours ago
-
RE: Do I just go with the lowest quote for my heat pump?
So after signing in Sept in two weeks the install may s...
By Jancold , 20 hours ago
-
RE: Victorian Semi Retrofit / Extension ASHP and UFH Advice
When you are renovating is always a good time, as it ma...
By JamesPa , 23 hours ago
-
RE: Just one room not reaching desired temperature
Looks like this issue is now resolved. Aira installed a...
By ChandyKris , 23 hours ago
-
There have been several people on the OpenEnergyMonitor...
By RobS , 2 days ago
-
RE: Say hello and introduce yourself
Good point @jamespa But that probably strengthens @ch...
By Transparent , 2 days ago
-
RE: Towel rails. An unexpected final hurdle
@jamespa Beware; the use of the term ‘WC’ might lead to...
By Toodles , 2 days ago
-
RE: Visit a Heat Pump sessions.
Congratulations @toodles, that's a fantastic result. We...
By Old_Scientist , 2 days ago
-
RE: Baxi Air Source Heat Pump tips and tricks please
@cathyem1 - thanks for the update. Let us know how it g...
By cathodeRay , 2 days ago
-
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH
@editor But do you wear your peaked cap the right way r...
By Toodles , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
I’d be interested to hear the feedback and consensus on...
By Mars , 2 days ago
Latest Topics
-
SolarPV tables / online calculator
By MichelleC 7 hours ago
-
Samsung Gen 7 R290 12kW is not behaving how I expected
By Joshua 19 hours ago
-
Newbie out of her depth – Samsung AE120RXYDEG 12kW heat pump
By BAMi 21 hours ago
-
By Toodles 2 days ago
-
Solid manhole cover within r290 exclusion zone
By dbrb2 2 days ago
-
Towel rails. An unexpected final hurdle
By Davesoa 2 days ago
-
By big_si 2 days ago