@majordennisbloodnok, the more I think about it, the more I like this section which I have now added with some initial broad sub-sections that should be enough to get us started. I will probably push some content here from My Home Farm when we start posting it because there will be an overlap.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Personally speaking, given the name of this forum, I would prefer to avoid confusion and make it easier to find information on the topic by sticking with topic as described in the name. If I want information about bikes, lorries and cooking etc I can look at relevant fora.
Just my 2pennorth.
Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.
2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.
As our humble forum and community matures and grows, we’ll be awarding achievement badges to dedicated members. For example, we’ll have an expert/helper badge for members that assist others along with some other fun, aspirational badges.
If you have any creative and fun achievement badges you’d like propose, please feel to suggest theses below or simply DM me.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Can we please do something with the CSS, please.... There's a whole lot of grey on dark grey going on and it's really hard to see.
Links could do with being in blue too...
Off grid on the isle of purbeck
2.4kW solar, 15kWh Seplos Mason, Outback power systems 3kW inverter/charger, solid fuel heating with air/air for shoulder months, 10 acres of heathland/woods.
My wife’s house: 1946 3 bed end of terrace in Somerset, ASHP with rads + UFH, triple glazed, retrofit IWI in troublesome rooms, small rear extension.
@hughf, I’ll have a look into. Not my strongest point, but I’ll see what I can do.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
@editor it’s probably set in a theme. There should be a theme editor/builder somewhere.
If you let me know what forum software you’re using (it’s a new one on me, I’m used to xenforo these days) I can do a bit of googling for you.
Off grid on the isle of purbeck
2.4kW solar, 15kWh Seplos Mason, Outback power systems 3kW inverter/charger, solid fuel heating with air/air for shoulder months, 10 acres of heathland/woods.
My wife’s house: 1946 3 bed end of terrace in Somerset, ASHP with rads + UFH, triple glazed, retrofit IWI in troublesome rooms, small rear extension.
@editor whatever you’ve changed looks good, I’ve got new posts and notifications showing in red now.
Off grid on the isle of purbeck
2.4kW solar, 15kWh Seplos Mason, Outback power systems 3kW inverter/charger, solid fuel heating with air/air for shoulder months, 10 acres of heathland/woods.
My wife’s house: 1946 3 bed end of terrace in Somerset, ASHP with rads + UFH, triple glazed, retrofit IWI in troublesome rooms, small rear extension.
@hughf, the CSS settings are a tad annoying, because it changes colours that are “connected” to different elements - changing the colour for the magnifying glass above, for example, changes a lot of things to that colour which isn’t a great look.
New posts and notifications are now in red, which I thought was a good colour. Thoughts?
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
@editor CSS is a pain to work with, I’m building web based control panels for a product we manufacture and it’s a pain compared to traditional GUI development in win32 or OS X. We’re always advised to not give every single item a separate ID and instead use classes. That’s why stuff ends up being affected by seemingly different changes.
The red is a nice touch and makes things a lot easier to see.
Off grid on the isle of purbeck
2.4kW solar, 15kWh Seplos Mason, Outback power systems 3kW inverter/charger, solid fuel heating with air/air for shoulder months, 10 acres of heathland/woods.
My wife’s house: 1946 3 bed end of terrace in Somerset, ASHP with rads + UFH, triple glazed, retrofit IWI in troublesome rooms, small rear extension.
@editor - Sorry to post this here, but I am getting an error when I try to post on another thread:
A potentially unsafe operation has been detected in your request to this site
Your access to this service has been limited. (HTTP response code 403)
If you think you have been blocked in error, contact the owner of this site for assistance.
Block Technical Data
Block Reason: | A potentially unsafe operation has been detected in your request to this site |
---|---|
Time: | Tue, 14 Jun 2022 9:03:10 GMT |
Seems to be caused by Wordfence:
Generated by Wordfence at Tue, 14 Jun 2022 9:03:10 GMT.
Your computer's time: Tue, 14 Jun 2022 09:03:11 GMT.
The post has an image in it (png format) - perhaps that's the problem? There is also a link - perhaps that is the problem?
Midea 14kW (for now...) ASHP heating both building and DHW
@cathoderay, odd – that's blocked by our site's firewall. Are you uploading a png file? Is that the error?
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Posted by: @editorAre you uploading a png file? Is that the error?
The post has both an image and a link in it. I tried the image (it's just a chart) as both a png and a jpg and a pdf, and de-url'd the link (. -> dot etc). The link was the address for the Met Office's WOW website, hardly a risky link, but all of them got rejected
The error (shown above) appeared when I pressed the Add Reply button.
Midea 14kW (for now...) ASHP heating both building and DHW
- 22 Forums
- 2,084 Topics
- 46 K Posts
- 42 Online
- 3,377 Members
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
RE: Surface mount or bury primaries for heat pump installation?
Current thinking is a Kronoterm Adapt. Doing the ground...
By tomasmcguinness , 13 minutes ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
It took me more than a few goes as well, plus some help...
By cathodeRay , 14 hours ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@ashp-bobba thank you, and equally so, thank you for ta...
By Mars , 1 day ago
-
@judith good to know… I’ll continue to feed Wattson, an...
By Mars , 1 day ago
-
RE: Vaillant AroTherm Plus 7kW
@jamespa I have a hydronic baseboard heater in the kitc...
By Scalextrix , 2 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
@editor great article re accreditation. I note ISO/IEC ...
By Bart , 2 days ago
-
RE: Renewables & Heat Pumps in the News
Here’s a little more technical detail/p>
By Judith , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
I don't (yet), but my PW3 is due to be installed shortl...
By Old_Scientist , 3 days ago
-
RE: MCS and NAPIT complaints process
@chrislay, is your heat pump complaint still unresolved...
By Mars , 3 days ago
-
RE: ASHP Install from hell - help please
@saf1973 I’ve been going through old cases on the forum...
By Mars , 3 days ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@aaron There's the rub, the database does not list my ...
By AF1 , 4 days ago
-
RE: Commencing on an ASHP Installation Process
Yes, it's "doable" if everything goes to plan, they arr...
By Old_Scientist , 5 days ago
-
RE: How not to install a heat pump
You are right. Thinking on this has evolved over the p...
By JamesPa , 6 days ago
-
RE: DHW SET UP with Samsung gen 5
Thats good news indeed, you are very likely almost ther...
By JamesPa , 6 days ago
-
RE: Plate heat exchanger considerations
As far as I can tell my vented system would have a peak...
By Scalextrix , 6 days ago
-
RE: Air Changes per Hour - ACH and the MCS requirement
There have been a few discussions dotted around (e.g. I...
By Declan90 , 6 days ago