@iantelescope, that is a daunting prospect and I wish you all the best, and it's simply ridiculous that you have found yourself in this situation.
Please feel free to start a new dedicated topic relating to the work you intend to undertake and we'd all love to follow the progress.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
@iantelescope thank you for sharing your saga with us. I have forwarded this onto the MCS and NICEIC for comment.
https://renewableheatinghub.co.uk/left-out-in-the-cold-homeowner-abandoned-by-mcs-nic
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
@iantelescope and @west - as the most recent members with fresh cases and issues, do either of you have home insurance with a additional legal cover?
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Yes have legal cover been there tried that, thanks anyway, they all say take legal action, dead end when no funds left to take action, government in Scotland no help, block you at every turn, even the green party net zero MSP!
The Samsung pulse width modulation output does not work at flow temperatures below 45 Deg C, why? It is anybody’s guess.Posted by: @iantelescope@Derek--m
With my "installer" being STRUCK OFF for the third, and hopefully final time, I will have to repair and replace my heat pump myself.
I intend with some trepidation, removing the lousy heat exchanger, an unnecessary 200 litre hot water tank and a 50 litre buffer tank.
I will also remove the water valves switching water between the Hot Water Tank and the heat exchanger.
I will also replace a faulty Samsung controller board, hopefully allowing the pulse width modulation motor output to finally work.
How to start, I am full of trepidation... Given my inexperience and the sheer physical size and weight of the heat pump .
Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.
@west I’m very curious to hear about your legal process and why that failed.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
I've been looking into this subject but can't find a definitive answer. Maybe someone can point me in the right direction. The MCS claims to provide a framework for ensuring the quality of both the installation work and the products used in heat pump installations in the UK. In MCS's own words, "An MCS certificate is proof that your installation has been designed, installed & commissioned to the highest standard using only MCS certified products by an MCS certified installer." That's not really saying an awful lot is it?
Does anyone know what the MCS's parameters, standards or definitions are for a "high standard" installation?
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
@editor Maybe somewhere from this link Mars
https://mcscertified.com/skills-and-competency/
Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Email to Napit, RECC, MCS in July 2023 one of hundreds go around in circles, no one cares As is the norm, with ---------, what is going on, asked for dates gave dates, not suitable, every day this drags on ---- will soon be returning to work, they still don't answer questions, more stress from them, this has gone on for years, even when the inspector says do something they still don't, are they really fit to be approved by Napit, MCS or RECC?
This is a disgrace, can I ask, has all this communication been passed to MCS? This issue has gone on for years before we eventually passed it to RECC, then Napit has been trying for years, still we wait to have this job completed, when will this ever be finished? What is the point of using an "approved" installer soon be 10 years of waiting.
Some of many mails re MCS
Hi, Can I ask a few questions, I have appointed an approved installer to install GSHP
Communication is hard to say the least, often no reply to emails, or phone calls.
Works not completed eg a radiator was ordered in Sept 2020, various issues, wrong size, told me to measure, then they measured, they lost measurements, eventually delivered months ago, still awaiting to be fitted. GSHP was damaged on arrival a new panel was supplied by makers marked on package Oct 2020, arrived here a few months ago, still here in the package. Asked repeatedly for a statement of the account, showing payments, invoices and balance, can't get this, and also missing invoices.
At a total loss, endless issues and no idea who to turn to for advice, what do I do, If I complain I have no chance of getting this resolved.
MCS is committed to providing a fair, consistent and accessible service for all of our customers. However, MCS has to balance this by providing a safe working environment for our staff to operate within and to ensure that our work is undertaken in an efficient and effective manner. On occasions, customers may make unreasonable demands that could affect the service we provide to other customers, or communicate with us in a manner which causes offence to our staff.
MCS reserves the right to manage customer contact in an appropriate manner to protect our staff and to maintain the effectiveness of our service.
THANK YOU
Thank you for completing the MCS Helpdesk Enquiry Form.
This has now been passed to our Helpdesk Team for processing. You will receive a response to this shortly.
Information submitted to the MCS Helpdesk is subject to processing under our Privacy Policy.
In the meantime, if you need any further assistance, please call the Helpdesk Team on 0333 103 8130 or email mcshelpdesk@mcscertified.com
@toodles, nope, been through those 😀
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
I was warned , by a retired advocate at the Court of session, the highest court in Scotland, that I would probably win my case against my , now former , "installer" but "I would be bankrupted in the attempt."
My MSP has , until recently, provided excellent contacts with the Energy Savings Trust, EST Scotland and Home Energy Scotland, HES.
My MSP, EST and HES contacts are very much the exception, however, with my "installer" and the NIC being particularly annoying.
However, I am speechless having received an E-mail from a Scottish Government minister , saying that I should contact the MCS and the NIC for help!!
A further ministerial comment, that I should examine the EST map of "Installers " is incredible given the "installers" absence of experience or competence.
After two years, hundreds of E-mails I have no confidence in mu "installer" , the NIC or the MCS .
ian
The MCS has been responsible for re-instating my "installer" on , at least two occasions following the NIC "STRIKING OFF " my "installer".
The NIC says "that it was NOT the NIC who has re-instated my "installer" , implying that it was the MCS who was responsible for re-instating my "installer".
I asked the MCS "what kind of organisation is the MCS" , receiving the reply that the MCS is a charity!!
I further asked how can a private company be a "Charity" receiving the reply that ........................................
"The MCS is a Charity because of it educates the general public about "limiting Energy consumption and the effects of Global Warming!".
So , the MCS is a private company presumably financially benefiting from it's charitable "educational" status!
- 26 Forums
- 2,114 Topics
- 46.4 K Posts
- 39 Online
- 3,410 Members
Join Us!
Latest Posts
-
@jamespa Thanks. I did not instruct them not to insul...
By Eliuccio , 56 minutes ago
-
RE: No-code, plug-and-play monitoring for your heat pump
To update an ESP device using ESPHome in Home Assistant...
By Grantmethestrength , 1 hour ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 I must admit I noticed that about Hitachi ...
By ASHP-BOBBA , 3 hours ago
-
RE: Is this just haze or something more?
I am not a scientist nor a meteorologist and I know the...
By Toodles , 2 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
It will improve performance, but by how much depends on...
By Brendon Uys , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
Said I would pop back with a update. Only Mr Jesus h...
By Burtis , 3 days ago
-
RE: Buffers, hot water and cooling
Thats presumably heat pump DT, what about radiator DT a...
By JamesPa , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Exactly the same here. We now have 13.5kWh ...
By Old_Scientist , 3 days ago
-
RE: Wood burner with ASHP - direct air?
This depends on the size of your wood burner and size/t...
By Lucia , 4 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn It's a not a buffer it's a volumiser which is ...
By Lucia , 4 days ago
-
RE: Is your heat pump insured?
To make things clear, lots of insurance companies cover...
By Lucia , 4 days ago
-
RE: Boxt Heat Pump Installation Experience
@adrian any updates since installation? How is it perfo...
By Ashfp , 4 days ago
-
RE: Say hello and introduce yourself
Hi @seatonian - Yes, I know Seaton, and I have the Nat...
By Transparent , 5 days ago
-
@seatonian got your email. Will connect you with a reco...
By Mars , 6 days ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 1 week ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (£700!) bu...
By Prunus , 1 week ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 1 week ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 1 week ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 1 week ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 1 week ago