@derek-m 😆 😆 the heatmisers controls the UFH. One zone is controlled by the wifi thermostat , which controls the living room and hallway, the other one which is a manual one controls the kitchen.
the other controls (760) does the dhw and ufh and towel rails upstairs.
no the installers didn't say how they interacted with each other.
thanks
@nigel42 Looks like the VRC 700 or a variant of it to me https://www.vaillant.co.uk/homeowners/products/vaillant-vrc-700-heating-control-29380.html
Hi Everyone,
I have noticed today, that although the ambient air temperature is a little warmer, our energy consumption has actually increased slightly. I think that in our case it is because it is quite windy at the moment, and hence cold air is finding its way through any nooks and crannies.
Has anyone noticed a similar effect?
I have a weather station here too and there is indeed a strong positive correlation between both wind speed and rain fall amounts to increased power usage by the ASHP, we have a 2001 house that I would say is draught free and well insulated too, its simply the cooling effect of wind especially on wet masonry
Posted by: @witchcraftI have a weather station here too and there is indeed a strong positive correlation between both wind speed and rain fall amounts to increased power usage by the ASHP, we have a 2001 house that I would say is draught free and well insulated too, its simply the cooling effect of wind especially on wet masonry
Thanks Witchcraft,
Did you notice any correlation with wind direction?
Actually, now you mention it, yes. I didn't change anything from yesterday and the house was 21.5C yesterday evening. I thoight about moving the curve down but didn't. Rads were 35 or so as I remember checking them. It's now about 20C now and rads are still 35C. So my very unscientific conclusion is that I could be losing 1C or so because of the 30mph winds and rain.
I feel a log fire coming on this evening ... 🙂
Hi Everyone,
If there is anyone on the forum that I have upset or annoyed, by my what would seem to be inquisitive questioning, then please accept my unreserved apology. It is not that I am an active busybody, but rather an Engineer, who prefers to deal with hard facts and information, rather than having to make assumptions. It is only by knowing the full details will it be possible for me to offer the most appropriate help and advice.
Forum users should remember that -
a) I was not involved in the design of their system
b) I was not involved in the installation and commissioning of their system.
c) I do not have details of their home and lifestyle.
d) I do not know what equipment has been installed and how it has been configured.
It is only by getting answers to at least some of the above will it be possible to offer the correct help and advice.
-
Have Consumers Been Lied to About the Efficiency of Heat Pumps Made in China?
1 month ago
-
Ecodan consuming 100kwh per day in new build!!!
2 months ago
-
Help with understanding my Mitsubishi Ecodan air source heat pump
5 months ago
-
Efficiency Concerns on newly installed Mitsubishi Ecodan 8.5kW
5 months ago
-
Running my new Nibe ASHP efficiently
8 months ago
- 26 Forums
- 2,171 Topics
- 47.8 K Posts
- 28 Online
- 5,744 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Powerwall 3 or Myenergi or something else?
Many of those tariffs are simple time of use tariffs, w...
By Temperature_Gradient , 2 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Yes thats the whole point of the flexis as regards tran...
By JamesPa , 2 hours ago
-
So far as I can tell designing for DT5, which is 'the n...
By JamesPa , 2 hours ago
-
Mitsu PAR-WT60R Wireless Controller - options
I hope I have satisfactorily installed the above wirele...
By DavidAlgarve , 4 hours ago
-
WC curve best discovered by experiment anyway as any lo...
By JamesPa , 9 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 1 day ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 1 day ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 1 day ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 1 day ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 1 day ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 2 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 2 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 2 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 2 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 3 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 3 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 3 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 5 days ago