Forums

Forums
Renewable Heating
Air Source Heat Pum...
Ecodan UD 0-0 error
 
Notifications
Clear all

Ecodan UD 0-0 error

 
Page 1 / 2
Air Source Heat Pumps (ASHPs)
Last Post by SUNandAIR 2 months ago
14 Posts
4 Users
2 Reactions
615 Views
RSS
 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
Topic starter 04/05/2025 5:40 pm  

Hi all

Anyone ever had a UD0-0 error on a Mitsubishi Ecodan.  Google wasn’t very helpful.  It’s doing it intermittently and shutting off the heat pump.


   
Quote
SUNandAIR
 SUNandAIR
(@sunandair)
Noble Member Member
Joined: 3 years ago
Posts: 500
04/05/2025 7:07 pm  

Hi Gary, haven’t seen full numbers on your error code but UD appears to be an overheat protection code. 

You could also do an Info request… like the flow rate enquiry. or, in this case, an error history enquiry. 

Enq code 103 is last error

Enq code 104 is second to last error

Enq code 105 is third to last error 

I don’t know how these enquiries would be displayed.

but hope this helps

This post was modified 3 months ago by SUNandAIR

   
ReplyQuote
 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
Topic starter 04/05/2025 7:25 pm  

Thanks it doesn’t provide anymore info just says UD-0


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 4 years ago
Posts: 3363
06/05/2025 7:33 am  

@gary I’ll ask Mitsubishi for some insights, and hopefully they can provide some clarification. Have you called their support line?

This post was modified 3 months ago by Mars

Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
Topic starter 06/05/2025 7:41 am  

@editor thanks Mars just waiting for support to open at 8am


   
👍
1
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 4 years ago
Posts: 3363
06/05/2025 7:49 am  

@gary after a quick document scan the UD0-0 error suggests a communication error between the outdoor and indoor units, or sometimes between components like the controller and the main PCB. Will be interesting to see if that’s correct and what Mitsubishi have to say.

Agreed that a Google search offers nothing, with this thread being the first search result 😂

Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote



 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
Topic starter 06/05/2025 1:10 pm  

@editor I found some info in the service manual it could be a bad condensing temperature or pressure sensor.

It shuts down the heat pump if condensing temperature is over 70C.

Does anyone know what typical condensing temperatures should be?


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 4 years ago
Posts: 3363
06/05/2025 4:05 pm  

@gary my Mitsubishi contact recommended you call the support line, and sent me this.

1746541381526

Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 4 years ago
Posts: 3363
06/05/2025 4:08 pm  

As far as I know (and I stand to be corrected) in normal operation, typical condensing temperatures on an ASHP are usually in the 40–60C range, depending on flow temps, load and outdoor conditions. Hitting 70C is high and usually a sign of something going wrong like a faulty sensor, blocked heat exchanger, poor flow or even a stuck valve. 

Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
Topic starter 06/05/2025 5:17 pm  

@editor thanks Mars that’s the same table I found in the service manual it’s does feel like it’s the sensor that’s at fault.  When it stopped it was reading 74C.

I managed to get the heat pump running this morning  at 32C flow temp but the condenser temp was reading 65C so if you are correct this also points to a faulty sensor.

The heat pump has now been off for 3 hours and it’s reading 68C which doesn’t seem likely.


   
👍
1
ReplyQuote
 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
Topic starter 11/05/2025 9:58 am  

£400 later and it’s fixed it was the T3 sensor that measures the condensed refrigerant temp it should read single figures was reading 65C and occasionally above 70C which is when it trips the error.


   
ReplyQuote
Abernyte
 Abernyte
(@abernyte)
Honorable Member Member
Joined: 3 years ago
Posts: 234
11/05/2025 1:38 pm  

Gary, might I enquire how old the Ecodan unit is? I am just trying to get a measure on the economics of the Mitsubishi service package, which includes all parts, and the random failure costs. £400 for a fairly minor sensor helps focus the mind!


   
ReplyQuote



Page 1 / 2
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online