Forums

Forums
Renewable Heating
Air Source Heat Pum...
Ecodan Holiday mode
 
Notifications
Clear all

Ecodan Holiday mode

 
Page 1 / 2
Air Source Heat Pumps (ASHPs)
Last Post by mjr 2 years ago
16 Posts
4 Users
1 Reactions
6,239 Views
RSS
 TRBob
(@trbob)
Estimable Member Member
Joined: 3 years ago
Posts: 52
Topic starter 17/03/2023 3:22 pm  

I'm going away soon for the first time since having the ASHP fitted, I have DHW set on a timer through the FTC Controller and my room temp set on timers in the MEL Cloud app.

Will either of these override Holiday Mode when it is set?


Mitsubishi Ecodan 8.5kWh
4.4kW Solar PV
5.2 kWh Battery Storage
1983 build, 300mm loft insulation, cavity wall insulation (beads)


   
Quote
 TRBob
(@trbob)
Estimable Member Member
Joined: 3 years ago
Posts: 52
Topic starter 21/03/2023 8:33 pm  

I turned the timer off on my phone. The heating has not come on, however the DHW has a mind of its own, it came on the morning that we left when it should not have done and despite being in 'Holiday Mode' it came on this evening when the temperature got to 40 degrees, so I've turned the HP off. I should have done this anyway as no sub zero temps are forecast. Annoying as I've just switched to Octopus Flux and was discharging the battery at the peak time. Its not the first time the DHW has heated when it isn't supposed to...


Mitsubishi Ecodan 8.5kWh
4.4kW Solar PV
5.2 kWh Battery Storage
1983 build, 300mm loft insulation, cavity wall insulation (beads)


   
ReplyQuote
 Fazel
(@fazel)
Reputable Member Member
Joined: 3 years ago
Posts: 124
21/03/2023 8:54 pm  

@trbob should I guess you don't have an option in the app to activate/non activate as in the wall controller? 

 

ecodan


   
ReplyQuote



 TRBob
(@trbob)
Estimable Member Member
Joined: 3 years ago
Posts: 52
Topic starter 21/03/2023 9:16 pm  

I activated Holiday mode before we left using the wireless thermostat by doing a long press, its activation was confirmed by both the Heating and DHW showing as 'Holiday' in the MELCloud app.


Mitsubishi Ecodan 8.5kWh
4.4kW Solar PV
5.2 kWh Battery Storage
1983 build, 300mm loft insulation, cavity wall insulation (beads)


   
ReplyQuote
 Fazel
(@fazel)
Reputable Member Member
Joined: 3 years ago
Posts: 124
21/03/2023 9:23 pm  

@trbob as per the photo from the ecodan data book it seems there is an option to further activate/de activate heating or dhw in hol mode. page 209 pdf

https://library.mitsubishielectric.co.uk/pdf/book/Ecodan_ATW_Databook_R32_Vol5_5

 

Ecodan_ATW_Databook_R32_Vol5.5_.pdf


   
ReplyQuote
 TRBob
(@trbob)
Estimable Member Member
Joined: 3 years ago
Posts: 52
Topic starter 21/03/2023 9:29 pm  

Thank you for the information, I'll investigate when I return home.


Mitsubishi Ecodan 8.5kWh
4.4kW Solar PV
5.2 kWh Battery Storage
1983 build, 300mm loft insulation, cavity wall insulation (beads)


   
ReplyQuote
 mjr
(@mjr)
Prominent Member Member
Joined: 4 years ago
Posts: 301
22/03/2023 6:19 pm  

Posted by: @trbob
↑

I'm going away soon for the first time since having the ASHP fitted, I have DHW set on a timer through the FTC Controller and my room temp set on timers in the MEL Cloud app.

Will either of these override Holiday Mode when it is set?

Probably! (Sorry, a bit late, I got logged out by the site yet again.)

I no longer trust MELCloud for holiday control since one time where it decided to set a 24°c heating target. I deactivate all MELCloud timers before activating Holiday Mode on the FTC. I also set it to finish the day BEFORE we intend to arrive home, to give it more than enough time to warm everything back up.

 



   
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 625
22/03/2023 7:28 pm  

Is it correct that Holiday Mode can only be set for a couple of days?  What is the process if one is going on a 2 or 3 week holiday?


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
 mjr
(@mjr)
Prominent Member Member
Joined: 4 years ago
Posts: 301
24/03/2023 1:04 am  

Posted by: @morgan
↑

Is it correct that Holiday Mode can only be set for a couple of days?  What is the process if one is going on a 2 or 3 week holiday?

There's a full calendar date entry on the FTC5 when the holiday mode is set. I've used it for 2 week holidays. I've not tested to see if there's any limit on the length but I don't remember reading of one.

 



   
ReplyQuote



Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 625
24/03/2023 8:36 am  

@mjr Thanks I've just found that feature.  I had only looked on the wireless remote for setting Holiday Mode.  There it's 72 hours max.

Also it appears, although I might be misinterpreting this, that the feature runs the same settings (i.e. a room temp' of 21c) but at a lower flow temp as opposed to switching everything off for a given period.  If that is correct I shall need to look to a different method of not wasting energy whilst the house is unoccupied.  Thoughts?


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
 mjr
(@mjr)
Prominent Member Member
Joined: 4 years ago
Posts: 301
24/03/2023 7:05 pm  

@morgan mine runs at 13c in holiday mode. I guess I probably set that in some menu in 2021.



   
👍
1
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 5 years ago
Posts: 625
24/03/2023 9:30 pm  

@mjr I’m away now so will have to see what happens come midnight when holiday mode kicks in.  No idea re a menu setting for temp so if it doesn’t drop I will have to turn it down via MelCloud.


Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
ReplyQuote
Page 1 / 2
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →