Forums

Forums
Renewable Heating
Air Source Heat Pum...
Air Source Heat Pum...
 
Notifications
Clear all

Air Source Heat Pump Policies – MCS Planning Standards

 
Page 6 / 15
Air Source Heat Pumps (ASHPs)
Last Post by JamesPa 1 year ago
176 Posts
10 Users
84 Reactions
25.4 K Views
RSS
 JamesPa
(@jamespa)
Illustrious Member Moderator
Joined: 2 years ago
Posts: 2832
18/02/2024 4:55 pm  

Posted by: @toodles
↑

@editor Mars, your heat pump is some distance from the property isn’t it? I would be interested to know please, how that pipe run was insulated as presumably, otherwise there would have been significant heat loss (and warming of garden!) over ??? metres of run. Regards, Toodles.

I did this calculation for a 20m run based on proprietary dual pipe 100mm OD insulated, for which loss figures were given by the manufacturer, and got to about 200W.  I cant quite remember if it was 200W out and another 200W back.  So 5-10% based on a 4kW average burn.  Not insignificant, but not completely crippling either.  Its not something you would choose to do if it could be avoided.


This post was modified 2 years ago 3 times by JamesPa

4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.


   
👍
1
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 5 years ago
Posts: 4427
18/02/2024 5:07 pm  

@editor

Are you certain the answer is 3? My calculations get an answer of 42. 😋 



   
👍
1
ReplyQuote
Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2066
18/02/2024 5:14 pm  

@editor [Second attempt to reply - first attempt shot up the heat exchanger!]

 

I think you may find the answer is the cube root of ‘42’!😊

Seriously though, I did contemplate the prospect of having our ASHP somewhere down the garden but felt that heat losses might be a problem. I envisaged that perhaps the ‘normally insulated’ pipe runs would perhaps then be placed in a double skinned insulated trunking to reduce losses. I decide that other complications would put the kibosh on any such plan as we would have to dig up considerable amounts of paving and steps, circumnavigate a drain and a sewer pipe and goodness knows what else en-route! I think your maths could baffle any politician into providing anything you so desired Mars! 😊 Regards, Toodles.


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
👍
1
ReplyQuote



Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3420
18/02/2024 5:41 pm  

@toodles the cost of the heat loss was not insignificant too. I think it was around £1,000 for the 25 odd metres. We were lucky that we had a gravel driveway. Definitely wouldn’t have done that if it had been paved.


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3420
18/02/2024 5:46 pm  

@jamespa interesting. Hopefully we’ll be able get some probes at either end of the run and see the numbers are.


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 JamesPa
(@jamespa)
Illustrious Member Moderator
Joined: 2 years ago
Posts: 2832
18/02/2024 6:28 pm  

Posted by: @editor
↑

@jamespa interesting. Hopefully we’ll be able get some probes at either end of the run and see the numbers are.

That would be good as I'm not sure that the calculation is likely to be particularly reliable, too many unknowns.

 


4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.


   
👍
1
ReplyQuote
Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2066
18/02/2024 6:38 pm  

@jamespa But not so bad as long as you know about the unknowns😉 Regards, Toodles.


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3420
18/02/2024 11:02 pm  

Here’s a close up of the heat loss pipe.

FAB79789 D460 44C4 A88A 1ED057F9CCB4

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3420
18/02/2024 11:42 pm  

@jamespa and @toodles we have definitive proof of heat loss via the heat loss pipe. I’ll try to figure out how much. 

driveway 4
Home Farm Thermal

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote



Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2066
19/02/2024 10:09 am  

@editor Thank you Mars! Regards, Toodles.


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
ReplyQuote
Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2066
19/02/2024 10:11 am  

@editor Some readers have UFH but you may be the only one with Under Ground Heating 😉 Regards, Toodles.


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
👍
1
ReplyQuote
 Persephone
(@persephone)
Estimable Member Member
Joined: 2 years ago
Posts: 66
Topic starter 19/02/2024 4:23 pm  

@derek-m The new kid on the block does not make noise 'constantly'. He/she does not generate LFN which is the source of insomnia, brain fog, palpitation, etc.

Heat pumps generate air-borne, structure-borne, and LFN. Ear plugs do not work for the last two.  



   
ReplyQuote
Page 6 / 15
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →