Air to Air heat pump for a flat ? An improvement on Electric Ceiling Heating.
Hi Newbie,
Were you complimenting me on my brilliant installation or the heat pump on it being neat and compact? Of course I did have to get my wife to lift it into place, couldn't possibly risk my back. 😯Â
I should point out that it is rated at 2.6kW and weighs I think 32kg. A smaller size unit was chosen for two main reasons, one being to gain more experience with ASHP's, and the other to better utilise our solar PV generation in Spring and Autumn and hence reduce our gas consumption. It also provides adequate air conditioning during the hotter Summer days. I do now regret not getting a system with two indoor units being supplied from one outdoor unit, but at the time I was not certain where to mount a second indoor unit.
If you wish to see more details of what is available, go to the Appliances Direct website and look under AC units. Whilst you can buy one for a fraction of the cost of an A2W system, you may struggle to get a local AC Engineer to install it for you. For some strange reason they seem to want to supply you with a unit from their supplier, at much elevated prices. I do believe Appliances Direct can provide an installation service.
The other thing of which you need to be aware, is that an A2A unit does not provide hot water.
Posted by: @mjrPosted by: @derek-mJust like an A2W heat pump, you need a good flow of fresh air through the outdoor unit
Yes, the unit was much smaller than the recess, with the rest of the grille being basically an intake for the rear of the unit.
If the unit is mounted at ground level there is always the risk of it drawing the colder discharge air back into the intake at the rear. It may be possible to arrange suitable ducting to ensure that the intake air is obtain some distance from the exhaust.
Â
Posted by: @derek-mPosted by: @mjrPosted by: @derek-mJust like an A2W heat pump, you need a good flow of fresh air through the outdoor unit
Yes, the unit was much smaller than the recess, with the rest of the grille being basically an intake for the rear of the unit.
If the unit is mounted at ground level there is always the risk of it drawing the colder discharge air back into the intake at the rear. It may be possible to arrange suitable ducting to ensure that the intake air is obtain some distance from the exhaust.
Â
Â
True. All the ones I've seen have been at least two floors up.
Â
- 22 Forums
- 2,084 Topics
- 46 K Posts
- 34 Online
- 3,378 Members
Join Us!
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
There are heat recovery heat pumps that are designed to...
By Scalextrix , 2 hours ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
Hi @m1kegibson Maybe a long shot but is the controll...
By RobS , 12 hours ago
-
RE: Renewables & Heat Pumps in the News
Yes I realise I'm picking this up a week late...... but...
By Transparent , 22 hours ago
-
@editor Mars if you have any recommendations for down s...
By abam48 , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness HI, The rules is a best practise, the ...
By ASHP-BOBBA , 2 days ago
-
RE: Vaillant AroTherm Plus 7kW
@scalextrix if your under unit heater is like our Myson...
By Judith , 2 days ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@cathoderay how did you get a script to run for that- d...
By benson , 2 days ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@ashp-bobba thank you, and equally so, thank you for ta...
By Mars , 3 days ago
-
@judith good to know… I’ll continue to feed Wattson, an...
By Mars , 3 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
@editor great article re accreditation. I note ISO/IEC ...
By Bart , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
I don't (yet), but my PW3 is due to be installed shortl...
By Old_Scientist , 5 days ago
-
RE: MCS and NAPIT complaints process
@chrislay, is your heat pump complaint still unresolved...
By Mars , 5 days ago
-
RE: ASHP Install from hell - help please
@saf1973 I’ve been going through old cases on the forum...
By Mars , 5 days ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@aaron There's the rub, the database does not list my ...
By AF1 , 6 days ago
-
RE: Commencing on an ASHP Installation Process
Yes, it's "doable" if everything goes to plan, they arr...
By Old_Scientist , 7 days ago
-
RE: How not to install a heat pump
You are right. Thinking on this has evolved over the p...
By JamesPa , 1 week ago